« previous next »
Pages: [1]   Go Down

Author Topic: Need help choosing proper hardware (solved)  (Read 646 times)

Offline Grandpa

  • Hero Member
  • *****
  • Posts: 810
Need help choosing proper hardware (solved)
« on: November 13, 2011, 10:43:22 AM »
I am using WiFi provided by my Mobil Home Park.  At the present time I have a outside antenna that brings the signal into my Mobil Home.  The signal goes to a Linksys wrt54g router with DD-WRT firmware installed.  I have made the router into a Client Bridge using that firmware.  I have then connected all my devices to that router (which is now a "Client Bridge") with a Ethernet cable.  This set up works great.  But a person is never satisfied.  Right?  Now I want to bring that signal into the house to some kind of device that will broadcast the signal to all my devices wireless.  I am sure there must be such a device out there some where but I haven't found it.  Anyone have a idea what would work?
« Last Edit: December 15, 2011, 08:47:14 PM by Grandpa »
Logged
Life is short, Break the rules, Forgive quickly, Kiss slowly, Love truly, Laugh uncontrollably, And never regret anything that made you smile.

Offline T6

  • Super Villain
  • ******
  • Posts: 19077
  • xmas is comming!
Re: Need help choosing proper hardware
« Reply #1 on: November 13, 2011, 11:04:25 AM »
you can connect a second router to the first ethernet port of the router, set it to dhcp and from the second create a wireless network to do what you want, this is useful if you have a router doing nothing around, some of us have one because internet providers gives us now modems with wireless routers offering 4 ethernet ports

there was a guide explaining how to use that router you have to be bridge and wireless router but i can't find it, maybe in the wrt website?

not sure if here is explained that

http://www.dd-wrt.com/wiki/index.php/Repeater_Bridge

http://www.dd-wrt.com/wiki/index.php/Repeater_Bridge#Wireless_Clients_cannot_connect_to_Repeater

probably you used this instructiuons?

http://www.dd-wrt.com/wiki/index.php/Universal_Wireless_Repeater
« Last Edit: November 13, 2011, 11:08:00 AM by T6 »
Logged
"If you wish to make an apple pie from scratch, you must first invent the universe."

Carl Sagan

Offline Grandpa

  • Hero Member
  • *****
  • Posts: 810
Re: Need help choosing proper hardware
« Reply #2 on: November 13, 2011, 11:27:52 AM »
Thanks T6!  I will check the links out.  Thanks again!
Logged
Life is short, Break the rules, Forgive quickly, Kiss slowly, Love truly, Laugh uncontrollably, And never regret anything that made you smile.

Offline pclinmike

  • Hero Member
  • *****
  • Posts: 637
  • I Only 'Clean' Windows !.
Re: Need help choosing proper hardware
« Reply #3 on: November 15, 2011, 04:42:45 PM »
What you want is a 'Wireless Access Point'
Logged
Michael.
From South-Derbyshire, England.U.K.Earth.

I Normally Do A Search Before I Post A New Question !.

Thanks to all who replied to my posts.

Offline Grandpa

  • Hero Member
  • *****
  • Posts: 810
Re: Need help choosing proper hardware
« Reply #4 on: December 15, 2011, 08:45:40 PM »
Sorry that it took so long to get back to this Post.  Today I finished my installation.  If you would read my first post, all hardware and connection are the same.  But the firmware has been updated to "DD-WRT v24 sp 2 .  I then changed the router to "Repeater Bridge".  I can now connect to the Parks WiFi Wired or Wireless.  It was so simple.  I will mark this as "solved"  Thanks to all who replied
Logged
Life is short, Break the rules, Forgive quickly, Kiss slowly, Love truly, Laugh uncontrollably, And never regret anything that made you smile.
Pages: [1]   Go Up
« previous next »