« previous next »
Pages: [1] 2   Go Down

Author Topic: Phoenix live cd will not boot on I7 x58 chip set  (Read 1711 times)

Offline af_murph

  • Jr. Member
  • **
  • Posts: 10
Phoenix live cd will not boot on I7 x58 chip set
« on: September 04, 2011, 12:13:22 PM »
Hope someone can help, new PC built from ground up, I7 960 on x58 chip set with 8g DDR3 mem, Radeon HD 6670 graphics card and 2 Tb hd. Live CD boots, shows splash screen with progress bar. The bar goes all the way across then sits nothing happens after, any ideas what could be preventing boot/causing the lockup? 
Logged

Offline menotu

  • PCLinuxOS Tester
  • Super Villain
  • *******
  • Posts: 15321
  • ┌∩┐(◕_◕)┌∩┐
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #1 on: September 04, 2011, 12:34:38 PM »
Hi af_murph - welcome to the forum, lovely to have you with us.

You could do an md5sum and/or media check to make sure the ISO download was good and the CD was burned successfully.
Logged
PCLinuxOS 32bit KDE 4.10.1; kernel-3.4.11-pclos1.bfs & 64bit 3.2.18bfs; NVidia GeForce 8400GS 1GB 310.19 driver

Sony Vaio SVE1513A4ESI Laptop, Intel Core i5, 2.6GHz, 6GB RAM, 750GB, 15.6" Intel HD Graphics 4000

Offline Sproggy

  • Hero Member
  • *****
  • Posts: 1484
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #2 on: September 04, 2011, 12:45:44 PM »
press esc ... and tell us the message thats being displayed ;)
Logged

Offline af_murph

  • Jr. Member
  • **
  • Posts: 10
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #3 on: September 04, 2011, 01:12:33 PM »
after the status bar reaches the end the system freezes and pressing esc has no effect
Logged

Offline Sproggy

  • Hero Member
  • *****
  • Posts: 1484
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #4 on: September 04, 2011, 01:13:24 PM »
press it at the beginning of the progress bar lol
Logged

Offline Hootiegibbon

  • Hero Member
  • *****
  • Posts: 4151
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #5 on: September 04, 2011, 01:16:42 PM »


or edit the splash=silent entry in the boot line to read  splash=verbose

Jase
Logged


I am Hootiegibbon, undisputed champion fo the typo

My .dotfiles

Offline af_murph

  • Jr. Member
  • **
  • Posts: 10
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #6 on: September 04, 2011, 01:21:39 PM »
I tried running the live CD using a different menu option and received the error:


Error: No suitable media for the live CD content found.
Workaround: Copy the content of the live CD from your boot device to an IDE/Sata disk.
Dropping you to a limited shell.

tried looking up boot option codes based on forum post, trying edd=off and livecd_sata_probe with no luck...yet!

Knowing the community is watching this post is much appreciated!

Murph...
Logged

Offline Hootiegibbon

  • Hero Member
  • *****
  • Posts: 4151
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #7 on: September 04, 2011, 01:26:03 PM »


most common cause's of that error is either a bad burn or a corrupted download - check the md5sum of the download and then reburn the iso image

Jase
Logged


I am Hootiegibbon, undisputed champion fo the typo

My .dotfiles

Offline Sproggy

  • Hero Member
  • *****
  • Posts: 1484
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #8 on: September 04, 2011, 01:27:04 PM »
i agree with Jase
Logged

Offline af_murph

  • Jr. Member
  • **
  • Posts: 10
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #9 on: September 04, 2011, 02:15:22 PM »
downloaded/burned and tried again...no luck. live cd worked on laptop and other tower. Looking into bios setting dealing with hard drive dealing with AHCI.

Thanks again for all the help

Murph...
Logged

Offline Sproggy

  • Hero Member
  • *****
  • Posts: 1484
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #10 on: September 04, 2011, 02:18:07 PM »
boot the new cd in safe mode ... tell us where is gets too
Logged

Offline af_murph

  • Jr. Member
  • **
  • Posts: 10
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #11 on: September 04, 2011, 02:42:27 PM »
booted safe mode: got to--

intel corporation|82801JI (ICH10 Family) SATA AHCI Controller
Please wait: detecting USB devices.
Please wait: detecting USB mass-storage devices.
[ OK ]
[DONE] "done is in red and everything after until the shell $"

Error: No suitable media for the live CD content found.
Workaround: Copy the content of the live CD from your boot device to an IDE/Sata disk.
Dropping you to a limited shell.


Murph...
Logged

Offline af_murph

  • Jr. Member
  • **
  • Posts: 10
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #12 on: September 04, 2011, 02:46:47 PM »
do you think the error could be caused by using SATA 3.0 and 6 GPS hard drive?
Logged

Offline Sproggy

  • Hero Member
  • *****
  • Posts: 1484
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #13 on: September 04, 2011, 02:57:39 PM »
it sounds like a bad burn still ... but if the disk is ok on your other machines it may be some hardware issue ... i am not really familiar with sata3 issues ... your gonna have to hold on till one of the Guru's pulls up a chair ;)
Logged

Offline af_murph

  • Jr. Member
  • **
  • Posts: 10
Re: Phoenix live cd will not boot on I7 x58 chip set
« Reply #14 on: September 04, 2011, 03:10:21 PM »
Thank you very much for all the help, really appreciate the effort and time.

Murph...
Logged
Pages: [1] 2   Go Up
« previous next »