Author Topic: Canon PIXMA MG6150 multifunction printer - scanner setup  (Read 1781 times)

Offline belantos

  • Jr. Member
  • **
  • Posts: 47
Canon PIXMA MG6150 multifunction printer - scanner setup
« on: May 03, 2011, 11:44:48 PM »
Hi all,

I downloaded and installed the scanner driver from Canon's website, but the scanner is nowhere to be found when I try to set it up in MCC.

Under USB Mass Storage Devices there is an entry for MG6100 series, but when I want to setup the scanner, funny it is, only my USB webcam is detected and the MG6100 is nowhere to be found.

Anyone had any success? Can anyone help?

Cheers,

Bela

Offline kalle123

  • Full Member
  • ***
  • Posts: 135
Re: Canon PIXMA MG6150 multifunction printer - scanner setup
« Reply #1 on: May 03, 2011, 11:57:37 PM »
Hi,

is the PIXMA directly connected to the pc or are you using a usb hub? A usb hub could cause problems.

In terminal type lsusb and post the result.

[04.05.2011 07:56 Uhr]
[kalle@nostromo 1] ~ > lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1a40:0101 TERMINUS TECHNOLOGY INC.
Bus 001 Device 003: ID 04a9:172e Canon, Inc.  <--- THAT IS MY PIXMA
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Offline belantos

  • Jr. Member
  • **
  • Posts: 47
Re: Canon PIXMA MG6150 multifunction printer - scanner setup
« Reply #2 on: May 04, 2011, 12:01:55 AM »
Yes, it is. I was able to setup the printer.

# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 001 Device 005: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000
Bus 001 Device 006: ID 04a9:174a Canon, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0d62:001c Darfon Electronics Corp.
Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Offline belantos

  • Jr. Member
  • **
  • Posts: 47
Re: Canon PIXMA MG6150 multifunction printer - scanner setup
« Reply #3 on: March 06, 2012, 02:48:58 AM »
I am still unable to install the scanner... Anyone has any experience in this area?

# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 054c:02a5 Sony Corp. MicroVault Flash Drive
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000
Bus 002 Device 003: ID 04a9:174a Canon, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0d62:001c Darfon Electronics Corp. Benq X120 Internet Keyboard Pro
Bus 003 Device 003: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

The printer is successfully installed.