[RESOLU] Clamav ne se met pas à jour?

[Arsène Leiris]

Salut à tous,
j'ai un soucis avec clamav, il ne se met pas à jour... j'ai installé tous les paquets mais rien à faire...
Que dois-je faire?

Merci

[Arsène Leiris]

je suis allé voir dans "gérer les services systèmes", j'ai cherché freshclam (c'est le composant qui met à jour la base de donnée virale), il était arrêté, j’essaie de le démarrer mais rien à faire ce message d'erreur apparait...



Que dois je faire?

Merci!

PS : est-ce normal que shorewall soit arrêté  

[Arsène Leiris]

petite précision, ça me fait la même chose pour tous les composants de clamav...

[mimas]

Il faut commenter la ligne Example dans freshclam.conf,

[Arsène Leiris]

commenter? Voilà le contenu du fichier, que dois-je modifier?

##
## Example config file for freshclam
## Please read the freshclam.conf(5) manual before editing this file.
##


# Comment or remove the line below.
Example

# Path to the database directory.
# WARNING: It must match clamd.conf's directive!
# Default: hardcoded (depends on installation options)
#DatabaseDirectory /var/lib/clamav

# Path to the log file (make sure it has proper permissions)
# Default: disabled
#UpdateLogFile /var/log/freshclam.log

# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M

# Log time with each message.
# Default: no
#LogTime yes

# Enable verbose logging.
# Default: no
#LogVerbose yes

# Use system logger (can work together with UpdateLogFile).
# Default: no
#LogSyslog yes

# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL

# This option allows you to save the process identifier of the daemon
# Default: disabled
#PidFile /var/run/freshclam.pid

# By default when started freshclam drops privileges and switches to the
# "clamav" user. This directive allows you to change the database owner.
# Default: clamav (may depend on installation options)
#DatabaseOwner clamav

# Initialize supplementary group access (freshclam must be started by root).
# Default: no
#AllowSupplementaryGroups yes

# Use DNS to verify virus database version. Freshclam uses DNS TXT records
# to verify database and software versions. With this directive you can change
# the database verification domain.
# WARNING: Do not touch it unless you're configuring freshclam to use your
# own database verification domain.
# Default: current.cvd.clamav.net
#DNSDatabaseInfo current.cvd.clamav.net

# Uncomment the following line and replace XY with your country
# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
#DatabaseMirror db.XY.clamav.net

# database.clamav.net is a round-robin record which points to our most
# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is
# not working. DO NOT TOUCH the following line unless you know what you
# are doing.
DatabaseMirror database.clamav.net

# How many attempts to make before giving up.
# Default: 3 (per mirror)
#MaxAttempts 5

# With this option you can control scripted updates. It's highly recommended
# to keep it enabled.
# Default: yes
#ScriptedUpdates yes

# By default freshclam will keep the local databases (.cld) uncompressed to
# make their handling faster. With this option you can enable the compression;
# the change will take effect with the next database update.
# Default: no
#CompressLocalDatabase no

# Number of database checks per day.
# Default: 12 (every two hours)
#Checks 24

# Proxy settings
# Default: disabled
#HTTPProxyServer myproxy.com
#HTTPProxyPort 1234
#HTTPProxyUsername myusername
#HTTPProxyPassword mypass

# If your servers are behind a firewall/proxy which applies User-Agent
# filtering you can use this option to force the use of a different
# User-Agent header.
# Default: clamav/version_number
#HTTPUserAgent SomeUserAgentIdString

# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
# multi-homed systems.
# Default: Use OS'es default outgoing IP address.
#LocalIPAddress aaa.bbb.ccc.ddd

# Send the RELOAD command to clamd.
# Default: no
#NotifyClamd /path/to/clamd.conf

# Run command after successful database update.
# Default: disabled
#OnUpdateExecute command

# Run command when database update process fails.
# Default: disabled
#OnErrorExecute command

# Run command when freshclam reports outdated version.
# In the command string %v will be replaced by the new version number.
# Default: disabled
#OnOutdatedExecute command

# Don't fork into background.
# Default: no
#Foreground yes

# Enable debug messages in libclamav.
# Default: no
#Debug yes

# Timeout in seconds when connecting to database server.
# Default: 30
#ConnectTimeout 60

# Timeout in seconds when reading from database server.
# Default: 30
#ReceiveTimeout 60

# With this option enabled, freshclam will attempt to load new
# databases into memory to make sure they are properly handled
# by libclamav before replacing the old ones.
# Default: yes
#TestDatabases yes

# When enabled freshclam will submit statistics to the ClamAV Project about
# the latest virus detections in your environment. The ClamAV maintainers
# will then use this data to determine what types of malware are the most
# detected in the field and in what geographic area they are.
# This feature requires LogTime and LogFile to be enabled in clamd.conf,
# it's also recommended to turn on ExtendedDetectionInfo.
# Default: no
#SubmitDetectionStats /path/to/clamd.conf

# Country of origin of malware/detection statistics (for statistical
# purposes only). The statistics collector at ClamAV.net will look up
# your IP address to determine the geographical origin of the malware
# reported by your installation. If this installation is mainly used to
# scan data which comes from a different location, please enable this
# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
# of the country of origin.
# Default: disabled
#DetectionStatsCountry country-code

# This option enables support for our "Personal Statistics" service.
# When this option is enabled, the information on malware detected by
# your clamd installation is made available to you through our website.
# To get your HostID, log on http://www.stats.clamav.net and add a new
# host to your host list. Once you have the HostID, uncomment this option
# and paste the HostID here. As soon as your freshclam starts submitting
# information to our stats collecting service, you will be able to view
# the statistics of this clamd installation by logging into
# http://www.stats.clamav.net with the same credentials you used to
# generate the HostID. For more information refer to:
# http://www.clamav.net/support/faq/faq-cctts/
# This feature requires SubmitDetectionStats to be enabled.
# Default: disabled
#DetectionStatsHostID unique-id

# This option enables support for Google Safe Browsing. When activated for
# the first time, freshclam will download a new database file (safebrowsing.cvd)
# which will be automatically loaded by clamd and clamscan during the next
# reload, provided that the heuristic phishing detection is turned on. This
# database includes information about websites that may be phishing sites or
# possible sources of malware. When using this option, it's mandatory to run
# freshclam at least every 30 minutes.
# Freshclam uses the ClamAV's mirror infrastructure to distribute the
# database and its updates but all the contents are provided under Google's
# terms of use. See http://code.google.com/support/bin/answer.py?answer=70015
# and http://safebrowsing.clamav.net for more information.
# Default: disabled
#SafeBrowsing yes

# This option enables downloading of bytecode.cvd, which includes additional
# detection mechanisms and improvements to the ClamAV engine.
# Default: enabled
#Bytecode yes

[mimas]

> # Comment or remove the line below.
> Example

Doit être

> # Comment or remove the line below.
> # Example

Il y a aussi cette ligne à changer

> #DatabaseMirror db.XY.clamav.net

Je dirais que remplacer XY par FR devrait faire l'affaire.

[Arsène Leiris]

Merci de ton aide mais j'ai encore 3 soucis (je suis obligé de les publier en 3 messages)
J'ai modifié freshclam, voilà ce qui me reste à faire :


le code modifié :

##
## Example config file for freshclam
## Please read the freshclam.conf(5) manual before editing this file.
##


# Comment or remove the line below.
#Example

# Path to the database directory.
# WARNING: It must match clamd.conf's directive!
# Default: hardcoded (depends on installation options)
#DatabaseDirectory /var/lib/clamav

# Path to the log file (make sure it has proper permissions)
# Default: disabled
#UpdateLogFile /var/log/freshclam.log

# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M

# Log time with each message.
# Default: no
#LogTime yes

# Enable verbose logging.
# Default: no
#LogVerbose yes

# Use system logger (can work together with UpdateLogFile).
# Default: no
#LogSyslog yes

# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL

# This option allows you to save the process identifier of the daemon
# Default: disabled
#PidFile /var/run/freshclam.pid

# By default when started freshclam drops privileges and switches to the
# "clamav" user. This directive allows you to change the database owner.
# Default: clamav (may depend on installation options)
#DatabaseOwner clamav

# Initialize supplementary group access (freshclam must be started by root).
# Default: no
#AllowSupplementaryGroups yes

# Use DNS to verify virus database version. Freshclam uses DNS TXT records
# to verify database and software versions. With this directive you can change
# the database verification domain.
# WARNING: Do not touch it unless you're configuring freshclam to use your
# own database verification domain.
# Default: current.cvd.clamav.net
#DNSDatabaseInfo current.cvd.clamav.net

# Uncomment the following line and replace XY with your country
# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
#DatabaseMirror db.FR.clamav.net

# database.clamav.net is a round-robin record which points to our most
# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is
# not working. DO NOT TOUCH the following line unless you know what you
# are doing.
DatabaseMirror database.clamav.net

# How many attempts to make before giving up.
# Default: 3 (per mirror)
#MaxAttempts 5

# With this option you can control scripted updates. It's highly recommended
# to keep it enabled.
# Default: yes
#ScriptedUpdates yes

# By default freshclam will keep the local databases (.cld) uncompressed to
# make their handling faster. With this option you can enable the compression;
# the change will take effect with the next database update.
# Default: no
#CompressLocalDatabase no

# Number of database checks per day.
# Default: 12 (every two hours)
#Checks 24

# Proxy settings
# Default: disabled
#HTTPProxyServer myproxy.com
#HTTPProxyPort 1234
#HTTPProxyUsername myusername
#HTTPProxyPassword mypass

# If your servers are behind a firewall/proxy which applies User-Agent
# filtering you can use this option to force the use of a different
# User-Agent header.
# Default: clamav/version_number
#HTTPUserAgent SomeUserAgentIdString

# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
# multi-homed systems.
# Default: Use OS'es default outgoing IP address.
#LocalIPAddress aaa.bbb.ccc.ddd

# Send the RELOAD command to clamd.
# Default: no
#NotifyClamd /path/to/clamd.conf

# Run command after successful database update.
# Default: disabled
#OnUpdateExecute command

# Run command when database update process fails.
# Default: disabled
#OnErrorExecute command

# Run command when freshclam reports outdated version.
# In the command string %v will be replaced by the new version number.
# Default: disabled
#OnOutdatedExecute command

# Don't fork into background.
# Default: no
#Foreground yes

# Enable debug messages in libclamav.
# Default: no
#Debug yes

# Timeout in seconds when connecting to database server.
# Default: 30
#ConnectTimeout 60

# Timeout in seconds when reading from database server.
# Default: 30
#ReceiveTimeout 60

# With this option enabled, freshclam will attempt to load new
# databases into memory to make sure they are properly handled
# by libclamav before replacing the old ones.
# Default: yes
#TestDatabases yes

# When enabled freshclam will submit statistics to the ClamAV Project about
# the latest virus detections in your environment. The ClamAV maintainers
# will then use this data to determine what types of malware are the most
# detected in the field and in what geographic area they are.
# This feature requires LogTime and LogFile to be enabled in clamd.conf,
# it's also recommended to turn on ExtendedDetectionInfo.
# Default: no
#SubmitDetectionStats /path/to/clamd.conf

# Country of origin of malware/detection statistics (for statistical
# purposes only). The statistics collector at ClamAV.net will look up
# your IP address to determine the geographical origin of the malware
# reported by your installation. If this installation is mainly used to
# scan data which comes from a different location, please enable this
# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
# of the country of origin.
# Default: disabled
#DetectionStatsCountry country-code

# This option enables support for our "Personal Statistics" service.
# When this option is enabled, the information on malware detected by
# your clamd installation is made available to you through our website.
# To get your HostID, log on http://www.stats.clamav.net and add a new
# host to your host list. Once you have the HostID, uncomment this option
# and paste the HostID here. As soon as your freshclam starts submitting
# information to our stats collecting service, you will be able to view
# the statistics of this clamd installation by logging into
# http://www.stats.clamav.net with the same credentials you used to
# generate the HostID. For more information refer to:
# http://www.clamav.net/support/faq/faq-cctts/
# This feature requires SubmitDetectionStats to be enabled.
# Default: disabled
#DetectionStatsHostID unique-id

# This option enables support for Google Safe Browsing. When activated for
# the first time, freshclam will download a new database file (safebrowsing.cvd)
# which will be automatically loaded by clamd and clamscan during the next
# reload, provided that the heuristic phishing detection is turned on. This
# database includes information about websites that may be phishing sites or
# possible sources of malware. When using this option, it's mandatory to run
# freshclam at least every 30 minutes.
# Freshclam uses the ClamAV's mirror infrastructure to distribute the
# database and its updates but all the contents are provided under Google's
# terms of use. See http://code.google.com/support/bin/answer.py?answer=70015
# and http://safebrowsing.clamav.net for more information.
# Default: disabled
#SafeBrowsing yes

# This option enables downloading of bytecode.cvd, which includes additional
# detection mechanisms and improvements to the ClamAV engine.
# Default: enabled
#Bytecode yes

[Arsène Leiris]

j'ai un soucis avec clamd :


voici le code:

##
## Example config file for the Clam AV daemon
## Please read the clamd.conf(5) manual before editing this file.
##


# Comment or remove the line below.
#Example

# Uncomment this option to enable logging.
# LogFile must be writable for the user running daemon.
# A full path is required.
# Default: disabled
#LogFile /tmp/clamd.log

# By default the log file is locked for writing - the lock protects against
# running clamd multiple times (if want to run another clamd, please
# copy the configuration file, change the LogFile variable, and run
# the daemon with --config-file option).
# This option disables log file locking.
# Default: no
#LogFileUnlock yes

# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M

# Log time with each message.
# Default: no
#LogTime yes

# Also log clean files. Useful in debugging but drastically increases the
# log size.
# Default: no
#LogClean yes

# Use system logger (can work together with LogFile).
# Default: no
#LogSyslog yes

# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL

# Enable verbose logging.
# Default: no
#LogVerbose yes

# Provide additional information about the infected file, such as its
# size and hash, together with the virus name. It's recommended to enable
# this option along with SubmitDetectionStats in freshclam.conf.
#ExtendedDetectionInfo yes

# This option allows you to save a process identifier of the listening
# daemon (main thread).
# Default: disabled
#PidFile /var/run/clamd.pid

# Optional path to the global temporary directory.
# Default: system specific (usually /tmp or /var/tmp).
#TemporaryDirectory /var/tmp

# Path to the database directory.
# Default: hardcoded (depends on installation options)
#DatabaseDirectory /var/lib/clamav

# Only load the official signatures published by the ClamAV project.
# Default: no
#OfficialDatabaseOnly no

# The daemon can work in local mode, network mode or both.
# Due to security reasons we recommend the local mode.

# Path to a local socket file the daemon will listen on.
# Default: disabled (must be specified by a user)
#LocalSocket /tmp/clamd.socket

# Sets the group ownership on the unix socket.
# Default: disabled (the primary group of the user running clamd)
#LocalSocketGroup virusgroup

# Sets the permissions on the unix socket to the specified mode.
# Default: disabled (socket is world accessible)
#LocalSocketMode 660

# Remove stale socket after unclean shutdown.
# Default: yes
#FixStaleSocket yes

# TCP port address.
# Default: no
#TCPSocket 3310

# TCP address.
# By default we bind to INADDR_ANY, probably not wise.
# Enable the following to provide some degree of protection
# from the outside world.
# Default: no
#TCPAddr 127.0.0.1

# Maximum length the queue of pending connections may grow to.
# Default: 15
#MaxConnectionQueueLength 30

# Clamd uses FTP-like protocol to receive data from remote clients.
# If you are using clamav-milter to balance load between remote clamd daemons
# on firewall servers you may need to tune the options below.

# Close the connection when the data size limit is exceeded.
# The value should match your MTA's limit for a maximum attachment size.
# Default: 25M
#StreamMaxLength 10M

# Limit port range.
# Default: 1024
#StreamMinPort 30000
# Default: 2048
#StreamMaxPort 32000

# Maximum number of threads running at the same time.
# Default: 10
#MaxThreads 20

# Waiting for data from a client socket will timeout after this time (seconds).
# Value of 0 disables the timeout.
# Default: 120
#ReadTimeout 300

# This option specifies the time (in seconds) after which clamd should
# timeout if a client doesn't provide any initial command after connecting.
# Default: 5
#CommandReadTimeout 5

# This option specifies how long to wait (in miliseconds) if the send buffer is full.
# Keep this value low to prevent clamd hanging
#
# Default: 500
#SendBufTimeout 200

# Maximum number of queued items (including those being processed by MaxThreads threads)
# It is recommended to have this value at least twice MaxThreads if possible.
# WARNING: you shouldn't increase this too much to avoid running out  of file descriptors,
# the following condition should hold:
# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024)
#
# Default: 100
#MaxQueue 200

# Waiting for a new job will timeout after this time (seconds).
# Default: 30
#IdleTimeout 60

# Don't scan files and directories matching regex
# This directive can be used multiple times
# Default: scan all
#ExcludePath ^/proc/
#ExcludePath ^/sys/

# Maximum depth directories are scanned at.
# Default: 15
#MaxDirectoryRecursion 20

# Follow directory symlinks.
# Default: no
#FollowDirectorySymlinks yes

# Follow regular file symlinks.
# Default: no
#FollowFileSymlinks yes

# Scan files and directories on other filesystems.
# Default: yes
#CrossFilesystems yes

# Perform a database check.
# Default: 600 (10 min)
#SelfCheck 600

# Execute a command when virus is found. In the command string %v will
# be replaced with the virus name.
# Default: no
#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"

# Run as another user (clamd must be started by root for this option to work)
# Default: don't drop privileges
#User clamav

# Initialize supplementary group access (clamd must be started by root).
# Default: no
#AllowSupplementaryGroups no

# Stop daemon when libclamav reports out of memory condition.
#ExitOnOOM yes

# Don't fork into background.
# Default: no
#Foreground yes

# Enable debug messages in libclamav.
# Default: no
#Debug yes

# Do not remove temporary files (for debug purposes).
# Default: no
#LeaveTemporaryFiles yes

# Detect Possibly Unwanted Applications.
# Default: no
#DetectPUA yes

# Exclude a specific PUA category. This directive can be used multiple times.
# See http://www.clamav.net/support/pua for the complete list of PUA
# categories.
# Default: Load all categories (if DetectPUA is activated)
#ExcludePUA NetTool
#ExcludePUA PWTool

# Only include a specific PUA category. This directive can be used multiple
# times.
# Default: Load all categories (if DetectPUA is activated)
#IncludePUA Spy
#IncludePUA Scanner
#IncludePUA RAT

# In some cases (eg. complex malware, exploits in graphic files, and others),
# ClamAV uses special algorithms to provide accurate detection. This option
# controls the algorithmic detection.
# Default: yes
#AlgorithmicDetection yes


##
## Executable files
##

# PE stands for Portable Executable - it's an executable file format used
# in all 32 and 64-bit versions of Windows operating systems. This option allows
# ClamAV to perform a deeper analysis of executable files and it's also
# required for decompression of popular executable packers such as UPX, FSG,
# and Petite.
# Default: yes
#ScanPE yes

# Executable and Linking Format is a standard format for UN*X executables.
# This option allows you to control the scanning of ELF files.
# Default: yes
#ScanELF yes

# With this option clamav will try to detect broken executables (both PE and
# ELF) and mark them as Broken.Executable.
# Default: no
#DetectBrokenExecutables yes


##
## Documents
##

# This option enables scanning of OLE2 files, such as Microsoft Office
# documents and .msi files.
# Default: yes
#ScanOLE2 yes

# This option enables scanning within PDF files.
# Default: yes
#ScanPDF yes


##
## Mail files
##

# Enable internal e-mail scanner.
# Default: yes
#ScanMail yes

# Scan RFC1341 messages split over many emails.
# You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
# WARNING: This option may open your system to a DoS attack.
#      Never use it on loaded servers.
# Default: no
#ScanPartialMessages yes


# With this option enabled ClamAV will try to detect phishing attempts by using
# signatures.
# Default: yes
#PhishingSignatures yes

# Scan URLs found in mails for phishing attempts using heuristics.
# Default: yes
#PhishingScanURLs yes

# Always block SSL mismatches in URLs, even if the URL isn't in the database.
# This can lead to false positives.
#
# Default: no
#PhishingAlwaysBlockSSLMismatch no

# Always block cloaked URLs, even if URL isn't in database.
# This can lead to false positives.
#
# Default: no
#PhishingAlwaysBlockCloak no

# Allow heuristic match to take precedence.
# When enabled, if a heuristic scan (such as phishingScan) detects
# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
# scan-time.
# When disabled, virus/phish detected by heuristic scans will be reported only at
# the end of a scan. If an archive contains both a heuristically detected
# virus/phish, and a real malware, the real malware will be reported
#
# Keep this disabled if you intend to handle "*.Heuristics.*" viruses
# differently from "real" malware.
# If a non-heuristically-detected virus (signature-based) is found first,
# the scan is interrupted immediately, regardless of this config option.
#
# Default: no
#HeuristicScanPrecedence yes

##
## Data Loss Prevention (DLP)
##

# Enable the DLP module
# Default: No
#StructuredDataDetection yes

# This option sets the lowest number of Credit Card numbers found in a file
# to generate a detect.
# Default: 3
#StructuredMinCreditCardCount 5

# This option sets the lowest number of Social Security Numbers found
# in a file to generate a detect.
# Default: 3
#StructuredMinSSNCount 5

# With this option enabled the DLP module will search for valid
# SSNs formatted as xxx-yy-zzzz
# Default: yes
#StructuredSSNFormatNormal yes

# With this option enabled the DLP module will search for valid
# SSNs formatted as xxxyyzzzz
# Default: no
#StructuredSSNFormatStripped yes


##
## HTML
##

# Perform HTML normalisation and decryption of MS Script Encoder code.
# Default: yes
#ScanHTML yes


##
## Archives
##

# ClamAV can scan within archives and compressed files.
# Default: yes
#ScanArchive yes

# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
# Default: no
#ArchiveBlockEncrypted no


##
## Limits
##

# The options below protect your system against Denial of Service attacks
# using archive bombs.

# This option sets the maximum amount of data to be scanned for each input file.
# Archives and other containers are recursively extracted and scanned up to this
# value.
# Value of 0 disables the limit
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 100M
#MaxScanSize 150M

# Files larger than this limit won't be scanned. Affects the input file itself
# as well as files contained inside it (when the input file is an archive, a
# document or some other kind of container).
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 25M
#MaxFileSize 30M

# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
# file, all files within it will also be scanned. This options specifies how
# deeply the process should be continued.
# Note: setting this limit too high may result in severe damage to the system.
# Default: 16
#MaxRecursion 10

# Number of files to be scanned within an archive, a document, or any other
# container file.
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10000
#MaxFiles 15000


##
## Clamuko settings
##

# Enable Clamuko. Dazuko must be configured and running. Clamuko supports
# both Dazuko (/dev/dazuko) and DazukoFS (/dev/dazukofs.ctrl). DazukoFS
# is the preferred option. For more information please visit www.dazuko.org
# Default: no
#ClamukoScanOnAccess yes

# The number of scanner threads that will be started (DazukoFS only).
# Having multiple scanner threads allows Clamuko to serve multiple
# processes simultaneously. This is particularly beneficial on SMP machines.
# Default: 3
#ClamukoScannerCount 3

# Don't scan files larger than ClamukoMaxFileSize
# Value of 0 disables the limit.
# Default: 5M
#ClamukoMaxFileSize 10M

# Set access mask for Clamuko (Dazuko only).
# Default: no
#ClamukoScanOnOpen yes
#ClamukoScanOnClose yes
#ClamukoScanOnExec yes

# Set the include paths (all files inside them will be scanned). You can have
# multiple ClamukoIncludePath directives but each directory must be added
# in a seperate line. (Dazuko only)
# Default: disabled
#ClamukoIncludePath /home
#ClamukoIncludePath /students

# Set the exclude paths. All subdirectories are also excluded. (Dazuko only)
# Default: disabled
#ClamukoExcludePath /home/bofh

# With this option enabled ClamAV will load bytecode from the database.
# It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
# Default: yes
#Bytecode yes

# Set bytecode security level.
# Possible values:
#       None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS
#         This value is only available if clamav was built with --enable-debug!
#       TrustSigned - trust bytecode loaded from signed .c[lv]d files,
#                insert runtime safety checks for bytecode loaded from other sources
#       Paranoid - don't trust any bytecode, insert runtime checks for all
# Recommended: TrustSigned, because bytecode in .cvd files already has these checks
# Note that by default only signed bytecode is loaded, currently you can only
# load unsigned bytecode in --enable-debug mode.
#
# Default: TrustSigned
#BytecodeSecurity TrustSigned

# Set bytecode timeout in miliseconds.
#
# Default: 60000
# BytecodeTimeout 60000

[Arsène Leiris]

et un dernier pour la route avec clamav milter :


voici le code :

##
## Example config file for clamav-milter
##

# Comment or remove the line below.
#Example


##
## Main options
##

# Define the interface through which we communicate with sendmail
# This option is mandatory! Possible formats are:
# [[unix|local]:]/path/to/file - to specify a unix domain socket
# inet:port@[hostname|ip-address] - to specify an ipv4 socket
# inet6:port@[hostname|ip-address] - to specify an ipv6 socket
#
# Default: no default
#MilterSocket /tmp/clamav-milter.socket
#MilterSocket inet:7357

# Define the group ownership for the (unix) milter socket.
# Default: disabled (the primary group of the user running clamd)
#MilterSocketGroup virusgroup

# Sets the permissions on the (unix) milter socket to the specified mode.
# Default: disabled (obey umask)
#MilterSocketMode 660

# Remove stale socket after unclean shutdown.
#
# Default: yes
#FixStaleSocket yes

# Run as another user (clamav-milter must be started by root for this option to work)
#
# Default: unset (don't drop privileges)
#User clamav

# Initialize supplementary group access (clamav-milter must be started by root).
#
# Default: no
#AllowSupplementaryGroups no

# Waiting for data from clamd will timeout after this time (seconds).
# Value of 0 disables the timeout.
#
# Default: 120
#ReadTimeout 300

# Don't fork into background.
#
# Default: no
#Foreground yes

# Chroot to the specified directory.
# Chrooting is performed just after reading the config file and before dropping privileges.
#
# Default: unset (don't chroot)
#Chroot /newroot

# This option allows you to save a process identifier of the listening
# daemon (main thread).
#
# Default: disabled
#PidFile /var/run/clamav-milter.pid

# Optional path to the global temporary directory.
# Default: system specific (usually /tmp or /var/tmp).
#
#TemporaryDirectory /var/tmp

##
## Clamd options
##

# Define the clamd socket to connect to for scanning.
# This option is mandatory! Syntax:
# ClamdSocket unix:path
# ClamdSocket tcp:host:port
# The first syntax specifies a local unix socket (needs an absolute path) e.g.:
#     ClamdSocket unix:/var/run/clamd/clamd.socket
# The second syntax specifies a tcp local or remote tcp socket: the
# host can be a hostname or an ip address; the ":port" field is only required
# for IPv6 addresses, otherwise it defaults to 3310, e.g.:
#     ClamdSocket tcp:192.168.0.1
#
# This option can be repeated several times with different sockets or even
# with the same socket: clamd servers will be selected in a round-robin fashion.
#
# Default: no default
#ClamdSocket tcp:scanner.mydomain:7357


##
## Exclusions
##

# Messages originating from these hosts/networks will not be scanned
# This option takes a host(name)/mask pair in CIRD notation and can be
# repeated several times. If "/mask" is omitted, a host is assumed.
# To specify a locally orignated, non-smtp, email use the keyword "local"
#
# Default: unset (scan everything regardless of the origin)
#LocalNet local
#LocalNet 192.168.0.0/24
#LocalNet 1111:2222:3333::/48

# This option specifies a file which contains a list of basic POSIX regular
# expressions. Addresses (sent to or from - see below) matching these regexes
# will not be scanned.  Optionally each line can start with the string "From:"
# or "To:" (note: no whitespace after the colon) indicating if it is,
# respectively, the sender or recipient that is to be whitelisted.
# If the field is missing, "To:" is assumed.
# Lines starting with #, : or ! are ignored.
#
# Default unset (no exclusion applied)
#Whitelist /etc/whitelisted_addresses

# Messages from authenticated SMTP users matching this extended POSIX
# regular expression (egrep-like) will not be scanned.
# As an alternative, a file containing a plain (not regex) list of names (one
# per line) can be specified using the prefix "file:".
# e.g. SkipAuthenticated file:/etc/good_guys
#
# Note: this is the AUTH login name!
#
# Default: unset (no whitelisting based on SMTP auth)
#SkipAuthenticated ^(tom|dick|henry)$

# Messages larger than this value won't be scanned.
# Make sure this value is lower or equal than StreamMaxLength in clamd.conf
#
# Default: 25M
#MaxFileSize 10M


##
## Actions
##

# The following group of options controls the delievery process under
# different circumstances.
# The following actions are available:
# - Accept
#   The message is accepted for delievery
# - Reject
#   Immediately refuse delievery (a 5xx error is returned to the peer)
# - Defer
#   Return a temporary failure message (4xx) to the peer
# - Blackhole (not available for OnFail)
#   Like Accept but the message is sent to oblivion
# - Quarantine (not available for OnFail)
#   Like Accept but message is quarantined instead of being delivered
#
# NOTE: In Sendmail the quarantine queue can be examined via mailq -qQ
# For Postfix this causes the message to be placed on hold
#
# Action to be performed on clean messages (mostly useful for testing)
# Default: Accept
#OnClean Accept

# Action to be performed on infected messages
# Default: Quarantine
#OnInfected Quarantine

# Action to be performed on error conditions (this includes failure to
# allocate data structures, no scanners available, network timeouts,
# unknown scanner replies and the like)
# Default: Defer
#OnFail Defer

# This option allows to set a specific rejection reason for infected messages
# and it's therefore only useful together with "OnInfected Reject"
# The string "%v", if present, will be replaced with the virus name.
# Default: MTA specific
#RejectMsg

# If this option is set to "Replace" (or "Yes"), an "X-Virus-Scanned" and an
# "X-Virus-Status" headers will be attached to each processed message, possibly
# replacing existing headers.
# If it is set to Add, the X-Virus headers are added possibly on top of the
# existing ones.
# Note that while "Replace" can potentially break DKIM signatures, "Add" may
# confuse procmail and similar filters.
# Default: no
#AddHeader Replace

# When AddHeader is in use, this option allows to arbitrary set the reported
# hostname. This may be desirable in order to avoid leaking internal names.
# If unset the real machine name is used.
# Default: disabled
#ReportHostname my.mail.server.name

# Execute a command (possibly searching PATH) when an infected message is found.
# The following parameters are passed to the invoked program in this order:
# virus name, queue id, sender, destination, subject, message id, message date.
# Note #1: this requires MTA macroes to be available (see LogInfected below)
# Note #2: the process is invoked in the context of clamav-milter
# Note #3: clamav-milter will wait for the process to exit. Be quick or fork to
# avoid unnecessary delays in email delievery
# Default: disabled
#VirusAction /usr/local/bin/my_infected_message_handler

##
## Logging options
##

# Uncomment this option to enable logging.
# LogFile must be writable for the user running daemon.
# A full path is required.
#
# Default: disabled
#LogFile /tmp/clamav-milter.log

# By default the log file is locked for writing - the lock protects against
# running clamav-milter multiple times.
# This option disables log file locking.
#
# Default: no
#LogFileUnlock yes

# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers.
#
# Default: 1M
#LogFileMaxSize 2M

# Log time with each message.
#
# Default: no
#LogTime yes

# Use system logger (can work together with LogFile).
#
# Default: no
#LogSyslog yes

# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
#
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL

# Enable verbose logging.
#
# Default: no
#LogVerbose yes

# This option allows to tune what is logged when a message is infected.
# Possible values are Off (the default - nothing is logged),
# Basic (minimal info logged), Full (verbose info logged)
# Note:
# For this to work properly in sendmail, make sure the msg_id, mail_addr,
# rcpt_addr and i macroes are available in eom. In other words add a line like:
# Milter.macros.eom={msg_id}, {mail_addr}, {rcpt_addr}, i
# to your .cf file. Alternatively use the macro:
# define(`confMILTER_MACROS_EOM', `{msg_id}, {mail_addr}, {rcpt_addr}, i')
# Postfix should be working fine with the default settings.
#
# Default: disabled
#LogInfected Basic

je te remercie beaucoup pour ton aide! ^^

[mimas]

Je n'utilise pas clamav, encore moins clamav-milter. PClinuxOS n'est pas pas installé sur ma machine.

Je ne peux pas t'aider d'avantage pour ton problème

[Arsène Leiris]

bon, tant pis, merci quand même! ^^
Espérons que quelqu'un d'autre me viendra en aide! 

[melodie]

bon, tant pis, merci quand même! ^^
Espérons que quelqu'un d'autre me viendra en aide! 

Salut,

Je te suggère de commencer par mettre les fichiers de conf (milter) dans translate google pour que tu puisses comprendre tout ou partie des commentaires.
http://translate.google.com

[06net]

Bonsoir,

Comme je ne recule devant aucun sacrifice pour aider, je n'hésite pas à parler de ce que je ne connais pas !
 
J'ai donc installé "clamtk" qui contient bien sur clamav mais pas "clamav-milter"
Tenté une mise à jour de la base de signatures. Sans succès...

Alors je pense que puisque la base en question est dans "clamav-db" que je viens d'installer je n'ai aucune chance de la mettre à jour vu que comme je l'ai dis je viens de l'installer.
Il n'y en a pas de plus récente même si elle date du 25/10. On n'est pas à Redmond ici 
Et j'ajouterai que j'ai pu constater quand j'utilisais Klamav pour mes enfants (Mandriva KDE à ce moment) que ce n'est pas un handicap. Et de loin amha.

[melodie]

Salut,

Pour la base de virus, lancer freshclam en console root.

clamav-milton est un autre paquet, il sert à scanner les mails.

++,
Mélodie