LiveUSB Problem-no IDE Devices

[dyndres]

My Problem is: By Installation to a Flash USB Devices no IDE Devices more... Hardware by "config my computer" no IDE Devices(no Harddisk and no optical Devices)  By using Live-CD minime 2010 KDE4 no Problems! I using before minime 2009 on a Flash USB Install without problems and remaster my System! Kernel Parameters all testet!?
can you help me? Thanks and greeting!

[Texstar]

My Problem is: By Installation to a Flash USB Devices no IDE Devices more... Hardware by "config my computer" no IDE Devices(no Harddisk and no optical Devices)  By using Live-CD minime 2010 KDE4 no Problems! I using before minime 2009 on a Flash USB Install without problems and remaster my System! Kernel Parameters all testet!?
can you help me? Thanks and greeting!

USB key installations are not supported at this time. We are looking to port Fedora's LiveUSBCreator program to PCLinuxOS. A package might be available at later date.

[Was_Just19]

My Problem is: By Installation to a Flash USB Devices no IDE Devices more... Hardware by "config my computer" no IDE Devices(no Harddisk and no optical Devices)  By using Live-CD minime 2010 KDE4 no Problems! I using before minime 2009 on a Flash USB Install without problems and remaster my System! Kernel Parameters all testet!?
can you help me? Thanks and greeting!

Welcome to the forum dyndres. 

How did you create the live-USB of 2010?
I use 2010 as a live-USB, but it does not presently support "persistence".

I created the live-USB in this way
http://www.pclinuxos.com/forum/index.php/topic,62202.0.html

Some more information should help get your 2010 working on live-USB.

regards.

[scoundrel]

My Problem is: By Installation to a Flash USB Devices no IDE Devices more... Hardware by "config my computer" no IDE Devices(no Harddisk and no optical Devices)  By using Live-CD minime 2010 KDE4 no Problems! I using before minime 2009 on a Flash USB Install without problems and remaster my System! Kernel Parameters all testet!?
can you help me? Thanks and greeting!

Welcome to the forum dyndres. 

How did you create the live-USB of 2010?
I use 2010 as a live-USB, but it does not presently support "persistence".

I created the live-USB in this way
http://www.pclinuxos.com/forum/index.php/topic,62202.0.html

Some more information should help get your 2010 working on live-USB.

regards.

does your way shut down/ reboot the 2010 fully ??

[Was_Just19]

does your way shut down/ reboot the 2010 fully ??

It is not the method that causes that .....  the incorrect shut down sequence is being called, which causes it.
I posted about that previously I think .......  but if when running live from a USB stick you delete the  /etc/rc.d/init.d/halt    file, and rename the   /etc/rc.d/init.d/halt.livecd    file to    /etc/rc.d/init.d/halt   then the stick will shut down correctly.

I did not bother digging any deeper, reckoning that it would be corrected quite soon.
I thought it might have been corrected for the re-issued ISOs ......  but have not checked them.

regards.

[scoundrel]

does your way shut down/ reboot the 2010 fully ??

It is not the method that causes that .....  the incorrect shut down sequence is being called, which causes it.
I posted about that previously I think .......  but if when running live from a USB stick you delete the  /etc/rc.d/init.d/halt    file, and rename the   /etc/rc.d/init.d/halt.livecd    file to    /etc/rc.d/init.d/halt   then the stick will shut down correctly.

I did not bother digging any deeper, reckoning that it would be corrected quite soon.
I thought it might have been corrected for the re-issued ISOs ......  but have not checked them.

regards.

read through your posts on making liveusb and thought it a bit geek .. I usually just let liveusb handle the whole thing aside from the partition which I format to fat32 ..works every time ..

[Was_Just19]

read through your posts on making liveusb and thought it a bit geek .. I usually just let liveusb handle the whole thing aside from the partition which I format to fat32 ..works every time ..

Hehe ......  I like to control what happens to memory sticks, and presently have three releases on one stick and have eight on another including PartitionMagick ----  both are 4 GB sticks.   

If that makes me geeky then I am guilty 

None of the utilities that I have looked at allows such versatility.   

regards.

[scoundrel]

read through your posts on making liveusb and thought it a bit geek .. I usually just let liveusb handle the whole thing aside from the partition which I format to fat32 ..works every time ..

Hehe ......  I like to control what happens to memory sticks, and presently have three releases on one stick and have eight on another including PartitionMagick ----  both are 4 GB sticks.   

If that makes me geeky then I am guilty 

None of the utilities that I have looked at allows such versatility.   

regards.

true ..

[dyndres]

Thanks for you biggest help!!!!  My Problem is simply! I Install my Flash-usb as usb-install with drakeliveinstaller and have noIDE Devices...
 I install all packages my favorites Programs and make mylivecd in console as root! Burn this iso and boot the new Live-CD and have all IDE Devices!!!! Wonderfull!!! Simply! Thanks!!!!!!!!! Fedora-live-installer and linux-live-usb creator no perfect for 2010KDE4, boot problems by me...
unetbootin for windows  is OK for live-usb by me!!!! By!!!!!

[Was_Just19]

Great news.

Congratulations on finding a workaround that suited your needs.   

regards.