Author Topic: Configuration e17PClinuxOS  (Read 13279 times)

Offline coffeetime

  • PCLinuxOS Tester
  • Hero Member
  • *******
  • Posts: 3426
  • Send me an Angel
Re: Configuration e17PClinuxOS
« Reply #15 on: May 13, 2010, 01:26:01 PM »
Page flipping stoppage instructions:


Settings
Setting Panel
Expand Window so you can see Input at the top of the screen
Input
Edge Bindings
Delete All
Apply
Close

DONE!
PCLinuxOS e17 Club member/e17 video/Wifi problems?
those who complain rarely read. those who read rarely complain
 

Offline smurfslover

  • Hero Member
  • *****
  • Posts: 811
Re: Configuration e17PClinuxOS
« Reply #16 on: June 08, 2010, 11:27:25 AM »
Set Alt + Tab and Alt + Shift + Tab to use Winlist NG

1- Load the winlist NG module. If you don't want it anymore you can also unload the old winlist
2- Open the settings panel and go to the input tab.
3- Open the 'key bindings' config screen and select the Alt + Tab combi, then on the right side select NG Winlist / 'Show next window'.
4- Use Alt + Shift + Tab for 'show previouw window' and click apply

Now when you switch windows with alt + tab or alt + shift + tab the winlist ng will popup.
You can alter the zooming effect in the settings panel -> Extensions -> Winlist NG
Registered Linux User 440970

Every windows machine has an un-patchable critical vulnerability... Its called "Power ON" switch.

Offline Agust

  • Hero Member
  • *****
  • Posts: 978
Re: Configuration e17PClinuxOS
« Reply #17 on: September 19, 2010, 03:57:56 AM »
ItaskNG dock for applications.
I put three pictures of how to set the dock.

First load module:

http://www.divshare.com/direct/12593773-875.png

Second settings module:

http://www.divshare.com/direct/12593774-f81.png

Third ItaskNG working:

http://www.divshare.com/direct/12593776-2e7.png

Easy eh!!!!!  ;)
Agust

PCLinuxOS e17 Club Member

Pclos user since 2005!

Offline Agust

  • Hero Member
  • *****
  • Posts: 978
Re: Configuration e17PClinuxOS
« Reply #18 on: October 25, 2010, 09:41:46 AM »
                                                   ****  ECOMORPH ****
First and more important. Settings > Modules > Disable module Shadows. , Ecomorph has its own module Shadows  ;).
Second , whenever you make changes, remember to tab Apply

Well , I will try to bring them little by little my Ecomorph configuration in this topic.
Is a configuration to have some nice effects without having any problem with Ecomorph, tested for over two years. ;D.

Open Ecomorph and check as in the image:

http://www.divshare.com/direct/12969948-28e.png

Now , configure Wobbly as image:


http://www.divshare.com/direct/12969949-269.png

Now go to the tab  "Animation"
Tab Open Animation and configured in this way:
In (type=Utility) "Duration we put ........ 195ms  in Effect put ......... Zoom"
In (type=Normal | Dialog | ModalDialog) "Duration we put ....... 150ms in Effect put ........ Fade"
In (type=Menu) "Duration we put ......... 300ms in Effect put .......... Burn"
In (type=Unknown) "Duration we put ......... 350ms in Effect put ........... Fade"

"Windows Opacity"


http://www.divshare.com/direct/12980559-c51.png

Let's add some more options.
Tab add see how he has created an option Xterm.



Now tad edit and we put this:
(type=Tolbar | Utility | Dialog | Modaldialog)
Tab Apply
Now in Opacity 90%
Tab Apply

Another option:
Tab add see how he has created an option Xterm.
Now tad edit and we put this:
(type=Tooltip | Notification)
Tab Apply
Now in Opacity 85%
Tab Apply

Another option for Programs Exmp: Xmms , Firefox , Thunar etc....
Tab add see how he has created an option Xterm.
Now tad edit and we put this:
(class=xmms)
Tab Apply
Now in Opacity 75%
Tab Apply

Agust
« Last Edit: October 26, 2010, 09:37:55 AM by Agust »

PCLinuxOS e17 Club Member

Pclos user since 2005!

Offline Agust

  • Hero Member
  • *****
  • Posts: 978
Re: Configuration e17PClinuxOS
« Reply #19 on: October 26, 2010, 09:45:07 AM »
** Close Animations **

Open Ecomorph an tab "Close Animations"
Modify the effects of this.
In (type=Normal | Dialog | ModalDialog) ..... Effect - Dream , Duration - 535ms
In (type=Menu | PopupMenu | DropdownMenu) ..... Effect - Explode, Duration - 425ms
In (type=Tooltip | Notification) ..... Effect - Fade , Duration - 480ms

Greetings:
Agust

PCLinuxOS e17 Club Member

Pclos user since 2005!

Offline smurfslover

  • Hero Member
  • *****
  • Posts: 811
Re: Configuration e17PClinuxOS
« Reply #20 on: October 26, 2010, 01:14:13 PM »
Thanks Agust good job. I"ll try them out to see how they work on somewhat older systems and maybe us some of them on the livecd. Hope to get it ready before the weekend but this week turns out extremely bussy.
Registered Linux User 440970

Every windows machine has an un-patchable critical vulnerability... Its called "Power ON" switch.

Offline Georgetoon

  • Hero Member
  • *****
  • Posts: 3196
  • Don't rush the bacon.:)
    • Georgetoon Cartoons!
Re: Configuration e17PClinuxOS
« Reply #21 on: October 26, 2010, 06:03:16 PM »
Agust!:)  Thank you!:) These are great!:) I'm running ecomorph and it's fantastic!:) I've enabled cube. Just wondering how I get the cube to rotate and is there a way to zoom it out and in? I'm running 4 desktops.
Toonfully,

Mark
-----------
Lenovo 14" ThinkPad Edge (0578F5U) with Core i3 Processor(i3-370M) 2.40 GHz 4GB RAM
Acer Aspire 9300 Laptop
Desktop Icy Dock system with AMD PHENOM X4 QUADCORE 9650 2.3GHZ 4MB L1 , ‎NVidia GEFORCE 9400GT 1GB 2X DVI PCIE graphics card, 22" Chimei monitor.

Offline Agust

  • Hero Member
  • *****
  • Posts: 978
Re: Configuration e17PClinuxOS
« Reply #22 on: October 27, 2010, 12:07:45 AM »
Cube is effect very very unstable!!!!! in Ecomorph.
I would not use it , if you want to use, simply assign a key combination.

Greetings:
Agust

PS:If I recall correctly default combination , I believe that Ctrl/Alt/Mousse right click/  ::).
« Last Edit: October 27, 2010, 05:26:46 AM by Agust »

PCLinuxOS e17 Club Member

Pclos user since 2005!

Offline Georgetoon

  • Hero Member
  • *****
  • Posts: 3196
  • Don't rush the bacon.:)
    • Georgetoon Cartoons!
Re: Configuration e17PClinuxOS
« Reply #23 on: October 27, 2010, 08:10:34 AM »
Cube is effect very very unstable!!!!! in Ecomorph.
I would not use it , if you want to use, simply assign a key combination.

Greetings:
Agust

PS:If I recall correctly default combination , I believe that Ctrl/Alt/Mousse right click/  ::).


Okay, I'll disable when I return to my PCLinuxOS system.  I won't even try the default key combination. why invite trouble?:)
Toonfully,

Mark
-----------
Lenovo 14" ThinkPad Edge (0578F5U) with Core i3 Processor(i3-370M) 2.40 GHz 4GB RAM
Acer Aspire 9300 Laptop
Desktop Icy Dock system with AMD PHENOM X4 QUADCORE 9650 2.3GHZ 4MB L1 , ‎NVidia GEFORCE 9400GT 1GB 2X DVI PCIE graphics card, 22" Chimei monitor.

Offline Agust

  • Hero Member
  • *****
  • Posts: 978
Re: Configuration e17PClinuxOS
« Reply #24 on: October 27, 2010, 10:04:56 AM »
Are you a smart man  ;).

Greetings:
Agust

PCLinuxOS e17 Club Member

Pclos user since 2005!

Offline rubentje1991

  • PCLinuxOS Tester
  • Hero Member
  • *******
  • Posts: 2110
  • Rubenus Parvus MCMXCI
Re: Configuration e17PClinuxOS
« Reply #25 on: October 27, 2010, 10:58:35 AM »
Cube works here in e17 (played with some settings: little slower, zooming out, ....)
But I can see it's beta (if too slow: during the animation, the windows disappear on the original desktop (when going to the other), which causes a little delay)

Offline rubentje1991

  • PCLinuxOS Tester
  • Hero Member
  • *******
  • Posts: 2110
  • Rubenus Parvus MCMXCI
Re: Configuration e17PClinuxOS
« Reply #26 on: November 10, 2010, 06:16:42 AM »
Thanks for all configuration tips!!!

Only thing that would be interesting: can I change the default menu in e17 (with the applications?)

In KDE4, when I installed something in Wine, it was added in sub-menu 'wine'....
So, now I install an application via wine, and I can't find where to add an entry for it (something that I use weekly - an .exe program).....
If it can be added to the menu, I also can make a shortcut for it, etc....

Thank you very much!

Offline Agust

  • Hero Member
  • *****
  • Posts: 978
Re: Configuration e17PClinuxOS
« Reply #27 on: November 10, 2010, 09:12:01 AM »
Adding applications to the menu:

Menu > Settings > Settings Panel , tab Application > New Application.


http://www.divshare.com/direct/13138175-c01.png

Now Name Application , Comment , click in search (small black box) copy and paste Path , Tab Icon and select Icon Application , tab Apply.
We have our application.

Greetings:
Agust




PCLinuxOS e17 Club Member

Pclos user since 2005!

Offline rubentje1991

  • PCLinuxOS Tester
  • Hero Member
  • *******
  • Posts: 2110
  • Rubenus Parvus MCMXCI
Re: Configuration e17PClinuxOS
« Reply #28 on: November 10, 2010, 10:35:58 AM »
Thanks for the explanation....

I could add it to favorite applications (I found now that wine DID make a link, but it wasn't simply available in Menu >> Applications >> Wine >> My-program)
and to my IBar

Thank you....
(if you know a way to add it to the Menu >> Applications, I'd like to hear it  ;) - but if it isn't possible, no problem at all, because I can reach it now easily)

Offline Agust

  • Hero Member
  • *****
  • Posts: 978
Re: Configuration e17PClinuxOS
« Reply #29 on: November 10, 2010, 10:52:50 AM »
If I understand you want to change the menu Enlightenment?
I remember that David , I make a program that allowed to put a submenu in the menu of Enlightenment , this submenu used for OpenGEU for their applications.
I try to look, but a long time .

Greetings:
Agust

PCLinuxOS e17 Club Member

Pclos user since 2005!