« previous next »
Pages: [1]   Go Down

Author Topic: K3b making coasters.  (Read 1136 times)

Offline panamahat

  • Jr. Member
  • **
  • Posts: 26
K3b making coasters.
« on: February 01, 2010, 10:39:09 PM »
K3b starts fine, sees my usb DVD burner, adds files, starts the burn, and then just quits, saying burn failed. So far It's only made coasters.
Below is appended the debug info:

System
-----------------------
K3b Version: 1.0.5

KDE Version: 3.5.10
QT Version:  3.3.8
Kernel:      2.6.26.8.tex3
Devices
-----------------------
HITACHI DVD-ROM GD-8000 0010 (/dev/hdb, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [None]

_NEC NR-7800A 1.25 (/dev/hda, ) [CD-R, CD-RW, CD-ROM] [CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R]
TSSTcorp CDDVDW SE-S204N TS02 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]
Burned media
-----------------------
DVD-R Sequential

K3bIsoImager
-----------------------
mkisofs print size result: 1412524 (2892849152 bytes)
Pipe throughput: 49143808 bytes read, 49139456 bytes written.

Used versions
-----------------------
mkisofs: 1.1.7.1
growisofs: 7.1

growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
/dev/sr0: "Current Write Speed" is 18.4x1352KBps.
    4784128/2892849152 ( 0.2%) @0.7x, remaining 50:18 RBU 100.0% UBU   4.8%
   15532032/2892849152 ( 0.5%) @2.3x, remaining 27:47 RBU 100.0% UBU  24.9%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 37:03 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 46:18 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 58:39 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 67:55 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 77:11 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 89:32 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 98:48 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 108:03 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 120:24 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 129:40 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 138:56 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 151:17 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 160:33 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 169:48 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 182:09 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 191:25 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 200:41 RBU 100.0% UBU 100.0%
   15532032/2892849152 ( 0.5%) @0.0x, remaining 213:02 RBU 100.0% UBU 100.0%
:-( unable to WRITE@LBA=1da0h: Input/output error
:-( write failed: Input/output error
/dev/sr0: flushing cache
/dev/sr0: updating RMA
/dev/sr0: closing session

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:1412524 -speed=18 -use-the-force-luke=bufsize:32m

mkisofs
-----------------------
1412524
I: -input-charset not specified, using utf-8 (detected in locale settings)
  0.04% done, estimate finish Wed Jan 27 00:13:13 2010
  0.07% done, estimate finish Wed Jan 27 00:13:13 2010
  0.11% done, estimate finish Wed Jan 27 00:13:13 2010
  0.14% done, estimate finish Wed Jan 27 00:13:13 2010
  0.18% done, estimate finish Wed Jan 27 00:13:13 2010
  0.21% done, estimate finish Wed Jan 27 00:21:02 2010
  0.25% done, estimate finish Wed Jan 27 00:19:56 2010
  0.28% done, estimate finish Wed Jan 27 00:19:04 2010
  0.32% done, estimate finish Wed Jan 27 00:18:26 2010
  0.35% done, estimate finish Wed Jan 27 00:17:55 2010
  0.39% done, estimate finish Wed Jan 27 00:17:29 2010
  0.43% done, estimate finish Wed Jan 27 00:17:07 2010
  0.46% done, estimate finish Wed Jan 27 00:16:49 2010
  0.50% done, estimate finish Wed Jan 27 00:16:34 2010
  0.53% done, estimate finish Wed Jan 27 00:16:21 2010
  0.57% done, estimate finish Wed Jan 27 00:16:09 2010
  0.60% done, estimate finish Wed Jan 27 00:15:58 2010
  0.64% done, estimate finish Wed Jan 27 00:15:49 2010
  0.67% done, estimate finish Wed Jan 27 00:15:41 2010
  0.71% done, estimate finish Wed Jan 27 00:15:34 2010
  0.74% done, estimate finish Wed Jan 27 00:15:27 2010
  0.78% done, estimate finish Wed Jan 27 00:15:21 2010
  0.81% done, estimate finish Wed Jan 27 00:15:15 2010
  0.85% done, estimate finish Wed Jan 27 00:15:10 2010
  0.89% done, estimate finish Wed Jan 27 00:15:05 2010
  0.92% done, estimate finish Wed Jan 27 00:15:01 2010
  0.96% done, estimate finish Wed Jan 27 00:16:42 2010
  0.99% done, estimate finish Wed Jan 27 00:16:34 2010
  1.03% done, estimate finish Wed Jan 27 00:16:27 2010
  1.06% done, estimate finish Wed Jan 27 00:16:21 2010
  1.10% done, estimate finish Wed Jan 27 00:16:15 2010
  1.13% done, estimate finish Wed Jan 27 00:16:09 2010
  1.17% done, estimate finish Wed Jan 27 00:34:36 2010
  1.20% done, estimate finish Wed Jan 27 00:33:58 2010
  1.24% done, estimate finish Wed Jan 27 00:40:07 2010
  1.28% done, estimate finish Wed Jan 27 00:39:21 2010
  1.31% done, estimate finish Wed Jan 27 00:38:39 2010
  1.35% done, estimate finish Wed Jan 27 00:37:59 2010
  1.38% done, estimate finish Wed Jan 27 00:38:33 2010
  1.42% done, estimate finish Wed Jan 27 00:37:55 2010
  1.45% done, estimate finish Wed Jan 27 00:37:19 2010
  1.49% done, estimate finish Wed Jan 27 00:36:45 2010
  1.52% done, estimate finish Wed Jan 27 00:36:12 2010
  1.56% done, estimate finish Wed Jan 27 00:35:40 2010
  1.59% done, estimate finish Wed Jan 27 00:36:13 2010
  1.63% done, estimate finish Wed Jan 27 00:35:43 2010
  1.66% done, estimate finish Wed Jan 27 00:35:15 2010
  1.70% done, estimate finish Wed Jan 27 00:34:47 2010

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid K3b data project -volset  -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bybArTb.tmp -rational-rock -hide-list /tmp/kde-root/k3baUxZJb.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-root/k3bP3Lgka.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bolgSVa.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid K3b data project -volset  -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bKCrjSa.tmp -rational-rock -hide-list /tmp/kde-root/k3bJfAqqb.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-root/k3b6i9nbc.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bdZPAsc.tmp

Help please.
Logged

Offline Crow

  • Hero Member
  • *****
  • Posts: 8756
  • OBJECTS IN MIRROR... ARE LOSING
Re: K3b making coasters.
« Reply #1 on: February 01, 2010, 10:50:04 PM »
I know it sounds silly but are you sure your DVD burner works?

I just (yesterday) changed the home desktop internal DVD burner, it was acting erratic until it failed.
Logged
I shall pass this way but once;
any good therefore that I can do,
or any kindness that I can show
let me not defer nor neglect it,
for I shall not pass this way again.

Linux User #330412

Online Old-Polack

  • Administrator
  • Super Villain
  • *****
  • Posts: 11542
  • ----IOFLU----
Re: K3b making coasters.
« Reply #2 on: February 02, 2010, 01:31:58 AM »
panamahat:

Try burning at a much slower speed.
Logged
Old-Polack

Of what use be there for joy, if not for the sharing thereof?



Lest we forget...

Offline joechimp

  • PCLinuxOS Tester
  • Hero Member
  • *******
  • Posts: 8614
  • The quality of mercy isnot strained It's PCLINUXOS
Re: K3b making coasters.
« Reply #3 on: February 02, 2010, 08:22:32 AM »
I agree with old-polack, try a much slower speed. I have always found that to be more reliable.
Logged
There is a 5th dimension,beyond that which is known to man.It is a dimension as vast as space and as timeless as infinity,between science& superstition,& it lies between the pit of man's fears and the summit of his knowledge.This is the dimension of imagination.It is an area which we call PCLINUXOS!

Offline panamahat

  • Jr. Member
  • **
  • Posts: 26
Re: K3b making coasters.
« Reply #4 on: February 03, 2010, 03:48:56 AM »
I tried it at every supported speed 18X down to 4X and No Joy.
Below is the debug info at 4X.
I know the burner works fine using Nero in XP. But I need it to work in Linux.
What the heck am I doing wrong?


System
-----------------------
K3b Version: 1.0.5

KDE Version: 3.5.10
QT Version:  3.3.8
Kernel:      2.6.26.8.tex3
Devices
-----------------------
HITACHI DVD-ROM GD-8000 0010 (/dev/hdb, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [None]

_NEC NR-7800A 1.25 (/dev/hda, ) [CD-R, CD-RW, CD-ROM] [CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R]
TSSTcorp CDDVDW SE-S204N TS02 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]
Burned media
-----------------------
DVD-R Sequential

K3bIsoImager
-----------------------
mkisofs print size result: 2195357 (4496091136 bytes)
Pipe throughput: 39211008 bytes read, 39190528 bytes written.

Used versions
-----------------------
mkisofs: 1.1.7.1
growisofs: 7.1

growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
/dev/sr0: "Current Write Speed" is 4.1x1352KBps.
    5570560/4496091136 ( 0.1%) @0.9x, remaining 53:44 RBU 100.0% UBU   4.8%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 94:02 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 147:47 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 188:05 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 228:23 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 282:08 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 322:26 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 362:45 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 416:29 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 456:47 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 497:06 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 550:50 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 591:09 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 631:27 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 685:11 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 725:30 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 765:48 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 819:33 RBU 100.0% UBU 100.0%
    5570560/4496091136 ( 0.1%) @0.0x, remaining 859:51 RBU 100.0% UBU 100.0%
:-( unable to WRITE@LBA=aa0h: Input/output error
:-( write failed: Input/output error
/dev/sr0: flushing cache
/dev/sr0: updating RMA
/dev/sr0: closing disc

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:2195357 -dvd-compat -speed=4 -use-the-force-luke=bufsize:32m

mkisofs
-----------------------
2195357
I: -input-charset not specified, using utf-8 (detected in locale settings)
  0.02% done, estimate finish Wed Feb  3 05:34:40 2010
  0.05% done, estimate finish Wed Feb  3 05:34:40 2010
  0.07% done, estimate finish Wed Feb  3 05:34:40 2010
  0.09% done, estimate finish Wed Feb  3 05:34:40 2010
  0.11% done, estimate finish Wed Feb  3 05:34:40 2010
  0.14% done, estimate finish Wed Feb  3 05:34:40 2010
  0.16% done, estimate finish Wed Feb  3 05:45:05 2010
  0.18% done, estimate finish Wed Feb  3 05:43:48 2010
  0.21% done, estimate finish Wed Feb  3 05:42:46 2010
  0.23% done, estimate finish Wed Feb  3 05:41:58 2010
  0.25% done, estimate finish Wed Feb  3 05:41:18 2010
  0.27% done, estimate finish Wed Feb  3 05:40:45 2010
  0.30% done, estimate finish Wed Feb  3 05:40:16 2010
  0.32% done, estimate finish Wed Feb  3 05:39:53 2010
  0.34% done, estimate finish Wed Feb  3 05:39:32 2010
  0.36% done, estimate finish Wed Feb  3 05:39:14 2010
  0.39% done, estimate finish Wed Feb  3 05:38:57 2010
  0.41% done, estimate finish Wed Feb  3 05:38:43 2010
  0.43% done, estimate finish Wed Feb  3 05:38:30 2010
  0.46% done, estimate finish Wed Feb  3 05:38:19 2010
  0.48% done, estimate finish Wed Feb  3 05:38:08 2010
  0.50% done, estimate finish Wed Feb  3 05:37:59 2010
  0.52% done, estimate finish Wed Feb  3 05:37:50 2010
  0.55% done, estimate finish Wed Feb  3 05:37:42 2010
  0.57% done, estimate finish Wed Feb  3 05:37:35 2010
  0.59% done, estimate finish Wed Feb  3 05:37:28 2010
  0.62% done, estimate finish Wed Feb  3 05:37:22 2010
  0.64% done, estimate finish Wed Feb  3 05:37:16 2010
  0.66% done, estimate finish Wed Feb  3 05:37:11 2010
  0.68% done, estimate finish Wed Feb  3 05:37:06 2010
  0.71% done, estimate finish Wed Feb  3 05:37:01 2010
  0.73% done, estimate finish Wed Feb  3 05:36:57 2010
  0.75% done, estimate finish Wed Feb  3 06:03:28 2010
  0.77% done, estimate finish Wed Feb  3 06:02:37 2010
  0.80% done, estimate finish Wed Feb  3 06:03:55 2010
  0.82% done, estimate finish Wed Feb  3 06:03:07 2010
  0.84% done, estimate finish Wed Feb  3 06:02:20 2010
  0.87% done, estimate finish Wed Feb  3 06:03:32 2010

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid 02/03/10 -volset  -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bdn8KOa.tmp -rational-rock -hide-list /tmp/kde-root/k3bJIGwpb.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-root/k3bAShzba.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3b0JrwGa.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid 02/03/10 -volset  -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bymybda.tmp -rational-rock -hide-list /tmp/kde-root/k3byx7b8b.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-root/k3bevoCgb.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bfxCkAb.tmp

Logged

Offline ElCuervo

  • Hero Member
  • *****
  • Posts: 4148
  • I'm walking on sunshine!
Re: K3b making coasters.
« Reply #5 on: February 03, 2010, 09:13:32 AM »
You may want to try updating the kernel to 2.6.27.31tex5. If that doesn't help, you can always revert to the older kernel if you prefer it, but it helped a K3b problem on one of my boxes.
« Last Edit: February 06, 2010, 05:13:50 PM by ElCuervo »
Logged
"If there were no change, there would be no butterflies" - Walt Disney

http://linuxcounter.net/cert/433721.png

Offline Georgetoon

  • Hero Member
  • *****
  • Posts: 3187
  • Don't rush the bacon.:)
    • Georgetoon Cartoons!
Re: K3b making coasters.
« Reply #6 on: February 03, 2010, 11:08:04 AM »
Are you burning files larger than the capacity of the disk?  Sometimes this happens in K9copy.  If you don't size the image correctly, it'll bomb out.  It sees the image as, say 5 gigs, and the disk as being 4.7 gigs and then just stops.

I know it's simplistic and rather obvious, but sometimes small things get overlooked.
Logged
Toonfully,

Mark
-----------
Lenovo 14" ThinkPad Edge (0578F5U) with Core i3 Processor(i3-370M) 2.40 GHz 4GB RAM
Acer Aspire 9300 Laptop
Desktop Icy Dock system with AMD PHENOM X4 QUADCORE 9650 2.3GHZ 4MB L1 , ‎NVidia GEFORCE 9400GT 1GB 2X DVI PCIE graphics card, 22" Chimei monitor.

NinerSevenTango

  • Guest
Re: K3b making coasters.
« Reply #7 on: February 06, 2010, 12:30:39 PM »
If none of the above works, try making sure DAO (disk-at-once) is selected.  I had some issues recently that were fixed by setting that.  Not sure why.

--97T--
Logged

markzl

  • Guest
Re: K3b making coasters.
« Reply #8 on: February 07, 2010, 03:53:11 PM »
hi,
i too had problems with my computer when it came to burning. A problem made worse by my "newness" to both linux & burning (lived without a computer & tv for over 5 years, still no tv but now i rarely get to bed before midnight because of the dvd's i watch on this computerizer!).

Anyhoo, i was also making coasters until i tried 2 things;

1. BEFORE i select my burn speed i put in a blank disk & wait until the computer/software finds it. What i mean is that there are alot more selections for burn speed before i put in the disk, afterward the computer reads the disk there are alot less & if i choose a speed that is no longer on this "new" list, it will burn me a coaster.

2. I select the second slowest speed. I would prefer the slowest speed for reliability (after all i am not pumping out multiple copies so i can afford to wait), but if i select the slowest i get yet another coaster.

Now i get good copies each time, however i still get butterflies in my stomach when i need to use Brasero which gave me all these coasters (my 1st burning software), despite the fact i now know it was my newbness that caused me all that grief. I even had to download gnomebaker each time i tried a new linux gnome distro!

hope it works out for you, i was where you are now & i feel your pain...

cya
Logged

Offline plambi

  • Full Member
  • ***
  • Posts: 143
Re: K3b making coasters.
« Reply #9 on: February 07, 2010, 10:04:45 PM »
These symptoms are familiar to me... Especially, when someone is smoking around the running computer... Most likely, the small lens above the laser diode is dirty. Try to clean it. Best results - Q-Tip and ammonia water solution.

Hope this helps. ;)
Logged
Pages: [1]   Go Up
« previous next »