« previous next »
Pages: [1]   Go Down

Author Topic: FeeCAD  (Read 444 times)

Offline linuxsnow

  • Full Member
  • ***
  • Posts: 152
FeeCAD
« on: January 16, 2013, 04:22:54 AM »
I come across this software but its only available in deb package based for Linux it seems.

Is it possible to to do a deb based installation with PCL2012?
Logged

Online DeBaas

  • Hero Member
  • *****
  • Posts: 1521
    • PCLinuxOS.nl
Re: FeeCAD
« Reply #1 on: January 16, 2013, 04:44:26 AM »
alien is the program you need, but...................
You are on your own.
Some programs make changes on the wrong places.
Some programs need alien libs.
You could destroy your installed system.

Quote
Install Debian and Slackware Packages with RPM
Alien is a program that converts between the rpm (Mandriva, Redhat ),
dpkg (Debian), slp (Stampede), and tgz (Slackware) file formats.
If you want to use a package from another distribution than the one
you have installed on your system, you can use alien to convert
it to your preferred package format and install it.
Logged

Offline horusfalcon

  • Hero Member
  • *****
  • Posts: 998
  • Wayfarer of The Western Wastes
Re: FeeCAD
« Reply #2 on: January 17, 2013, 01:07:13 PM »
Quote from: DeBaas on January 16, 2013, 04:44:26 AM
alien is the program you need, but...................
You are on your own.
Some programs make changes on the wrong places.
Some programs need alien libs.
You could destroy your installed system.

Quote
Install Debian and Slackware Packages with RPM
Alien is a program that converts between the rpm (Mandriva, Redhat ),
dpkg (Debian), slp (Stampede), and tgz (Slackware) file formats.
If you want to use a package from another distribution than the one
you have installed on your system, you can use alien to convert
it to your preferred package format and install it.

Before going this route, you might look at HeeksCAD or QCAD, both of which are in the repositories.  Just sayin'... might save you some trouble?

Later On,
D
Logged
"The Way is not a matter of knowing or not knowing.  One word to a wise man; one lash to a bright horse."

Dell Latitude D620, PCLinuxOS 2012.08 KDE4/LXDE, 3.2.18.pclos.bfs, specs here.

Offline Ray2047

  • Hero Member
  • *****
  • Posts: 1503
Re: FeeCAD
« Reply #3 on: January 17, 2013, 01:38:38 PM »
Quote
you might look at HeeksCAD or QCAD
Not the original poster but I just looked at HeeksCad and it seems uninstallable.

Quote
HeeksCAD:
 Depends: libFWOSPlugin.so.0  but it is not installable
 Depends: libTKAdvTools.so.0  but it is not installable
 Depends: libTKBool.so.0  but it is not installable
 Depends: libTKBO.so.0  but it is not installable
 Depends: libTKBRep.so.0  but it is not installable
 Depends: libTKCAF.so.0  but it is not installable
 Depends: libTKCDF.so.0  but it is not installable
Logged
KDE 64 bit.
CPU: AMD Athlon II X2 250 Processor.
Display:  nVidia C61 [GeForce 7025 / nForce 630a.
Memory: 3Gb

Offline russell.eberhardt

  • Sr. Member
  • ****
  • Posts: 408
Re: FeeCAD
« Reply #4 on: January 17, 2013, 01:49:30 PM »
Try Draftsight, a free CAD package from Solidworks.  Not in the repos so at your own risk but I've been using it for a year or so with no problems.

Russell
Sorry, just remenbered Freecad is 3D not 2D.
« Last Edit: January 17, 2013, 01:53:03 PM by russell.eberhardt »
Logged
Desktop: Gigabyte GA-MA770T-UD3 motherboard, NVIDIA GeForce 8400GS, AMD Phenom II Quad Core Processor 3GHz, 4GB ram, 250GB + 500GB SATA HD,

Offline horusfalcon

  • Hero Member
  • *****
  • Posts: 998
  • Wayfarer of The Western Wastes
Re: FeeCAD
« Reply #5 on: January 17, 2013, 02:10:16 PM »
Quote from: Ray2047 on January 17, 2013, 01:38:38 PM
Quote
you might look at HeeksCAD or QCAD
Not the original poster but I just looked at HeeksCad and it seems uninstallable.

Quote
HeeksCAD:
 Depends: libFWOSPlugin.so.0  but it is not installable
 Depends: libTKAdvTools.so.0  but it is not installable
 Depends: libTKBool.so.0  but it is not installable
 Depends: libTKBO.so.0  but it is not installable
 Depends: libTKBRep.so.0  but it is not installable
 Depends: libTKCAF.so.0  but it is not installable
 Depends: libTKCDF.so.0  but it is not installable



You may want to create a separate thread for this.  What release of PCLinuxOS are you using?  I'm using 2012.08 with the updated sources.list per this thread and see that I'm having the same problems (I just did a re-install a couple of weeks back to correct a poor partitioning scheme).  This may be a problem with the repos (Not likely) or the package (seems more likely to me).

The right place to report this is in the Packaging section of the board, starting a new topic.  Please look at this topic before posting...  (EDIT from my previous, which was in error.)

Later On,
D
« Last Edit: January 17, 2013, 03:38:49 PM by horusfalcon »
Logged
"The Way is not a matter of knowing or not knowing.  One word to a wise man; one lash to a bright horse."

Dell Latitude D620, PCLinuxOS 2012.08 KDE4/LXDE, 3.2.18.pclos.bfs, specs here.

Offline Ray2047

  • Hero Member
  • *****
  • Posts: 1503
Re: FeeCAD
« Reply #6 on: January 17, 2013, 02:27:59 PM »
Horusfalcon suggested:
Quote
You may want to create a separate thread for this.
Not really that interested in installing just got curious about it because of this thread. I thought I might play with it but not serious enough about it to pursue it. I only posted in an attempt to be helpful.
Logged
KDE 64 bit.
CPU: AMD Athlon II X2 250 Processor.
Display:  nVidia C61 [GeForce 7025 / nForce 630a.
Memory: 3Gb

Offline horusfalcon

  • Hero Member
  • *****
  • Posts: 998
  • Wayfarer of The Western Wastes
Re: FeeCAD
« Reply #7 on: January 17, 2013, 03:21:24 PM »
Quote from: Ray2047 on January 17, 2013, 02:27:59 PM
Horusfalcon suggested:
Quote
You may want to create a separate thread for this.
Not really that interested in installing just got curious about it because of this thread. I thought I might play with it but not serious enough about it to pursue it. I only posted in an attempt to be helpful.

Sure.  I'll take it up with the packager, then.  Thanks for the report!

Later On,
D
Logged
"The Way is not a matter of knowing or not knowing.  One word to a wise man; one lash to a bright horse."

Dell Latitude D620, PCLinuxOS 2012.08 KDE4/LXDE, 3.2.18.pclos.bfs, specs here.

Offline gseaman

  • PCLinuxOS Tester
  • Hero Member
  • *******
  • Posts: 3794
Re: FeeCAD
« Reply #8 on: January 19, 2013, 10:08:01 PM »
I've been working on FreeCAD. It is a bear to get all of the dependencies and to build correctly. I stopped working on it for a while, but I am trying again. :)

Galen
Logged

Offline Archie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8590
  • Aurum nostrum non est aurum vulgi.
Re: FeeCAD
« Reply #9 on: January 19, 2013, 10:44:06 PM »
I'm using CAD extensively on my current work ... basically AutoCAD but I bring in my laptop where I installed DraftSight. I would also like to try FreeCAD ... go, Galen, GO!
Logged
Since 2006 | LiCo 401868 | Bare Metal | What is necessary is never unwise. --Sarek, 2258.42

Offline gseaman

  • PCLinuxOS Tester
  • Hero Member
  • *******
  • Posts: 3794
Re: FeeCAD
« Reply #10 on: January 20, 2013, 10:30:29 PM »
All dependencies are in place and it is building without errors to 38%, so far. It is a very big package to compile, could be a few hours. :P  ;)

Galen
Logged

Offline gseaman

  • PCLinuxOS Tester
  • Hero Member
  • *******
  • Posts: 3794
Re: FeeCAD
« Reply #11 on: January 21, 2013, 12:04:32 AM »
One and a half hours later it is at 55%.  ::) I'm going to need to get me an I7.  :-[ It should finish while I am sleeping. :)

Galen
Logged

Online DeBaas

  • Hero Member
  • *****
  • Posts: 1521
    • PCLinuxOS.nl
Re: FeeCAD
« Reply #12 on: January 21, 2013, 03:28:41 AM »
Quote
I'm going to need to get me an I7
Or 4 ;)

for M$ gaming
for Uß gaming (Steam)
PCLinuxOS workhorse
PCLinuxOS packaging and developing

You are multi tasking, aren't you?  8)
Logged

Offline gseaman

  • PCLinuxOS Tester
  • Hero Member
  • *******
  • Posts: 3794
Re: FeeCAD
« Reply #13 on: January 21, 2013, 04:24:49 AM »
Quote from: DeBaas on January 21, 2013, 03:28:41 AM
Quote
I'm going to need to get me an I7
Or 4 ;)

for M$ gaming
for Uß gaming (Steam)
PCLinuxOS workhorse
PCLinuxOS packaging and developing

You are multi tasking, aren't you?  8)

It's more like mult-waiting. ;D

Galen
Logged

Offline Archie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8590
  • Aurum nostrum non est aurum vulgi.
Re: FeeCAD
« Reply #14 on: January 21, 2013, 06:30:53 AM »
Quote from: gseaman on January 21, 2013, 12:04:32 AM
One and a half hours later it is at 55%.  ::) I'm going to need to get me an I7.  :-[ It should finish while I am sleeping. :)

Galen

Fingers crossed ... and my tail is wagging!  ;)
Logged
Since 2006 | LiCo 401868 | Bare Metal | What is necessary is never unwise. --Sarek, 2258.42

Pages: [1]   Go Up
« previous next »