Kwin Effects Problem

[raed]

The graphic card you have selected may not be correct. Try selecting GeForce 400 or later.

Also search Synaptic for nvidia-current and see if it is installed.

yup nvidia-current installed



i choose GeForce 400 or later

[raed]

If you haven't yet tried it, try

Config Your Desktop > Workspace Appearance and Behavior > Desktop Effects - Advanced Tab > Composting Type

try changing the Composting Type to XRender - if that is accepted then try OpenGL

and/or try switching the QT Graphic System

Occasionally it needs the desktop to be restarted after some System Settings have been applied/removed

i tried that still the problem see with "minimize effect enabled"

Screencast223

without "minimize effect"

Screencast2 (Embedding disabled, limit reached)

[sling-shot]

but after restat i see this the Propriety driver for your graphic card can not be found, the system is now using the free software driver (nvidia) !!
also in PCC message beside word "MODULE"

Does it still say the same thing now?

[raed]

BTW there is a message appear at boot says : grep : /etc/X11/xorg.conf : no such file or directory

[raed]

but after restat i see this the Propriety driver for your graphic card can not be found, the system is now using the free software driver (nvidia) !!
also in PCC message beside word "MODULE"

Does it still say the same thing now?

no just one time then gone but in PCC , what does this message mean ?



card:nvidia cards not working with nv. can i ignore it ?

[sling-shot]

The message about nv module probably means that your particular card is not yet supported by it. Just guessing here.

I read somewhere that xorg.conf is not really needed for X anymore. But having one allows you to run an exact configuration you desire.

Go to /etc/X11 and check if xorg.conf does indeed exist or not.

If not, you may need to create one.

[raed]

The message about nv module probably means that your particular card is not yet supported by it. Just guessing here.

I read somewhere that xorg.conf is not really needed for X anymore. But having one allows you to run an exact configuration you desire.

Go to /etc/X11 and check if xorg.conf does indeed exist or not.

If not, you may need to create one.

yes yes at startup before when this message appear  "the Propriety driver for your graphic card can not be found, the system is now using the free software driver (nvidia) !!" and say reason : GF108 not supported by nvidia driver . Sorry i forgot to mention.

yes xorg.conf exist

Code: [Select]

[raed@localhost ~]$ cat /etc/X11/xorg.conf                                                                                                                           
# File generated by XFdrake (rev 262502)                                                                                                                             
                                                                                                                                                                     
# **********************************************************************                                                                                             
# Refer to the xorg.conf man page for details about the format of                                                                                                     
# this file.                                                                                                                                                         
# **********************************************************************                                                                                             
                                                                                                                                                                     
Section "ServerFlags"                                                                                                                                                 
    Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)                                                                                                 
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work                                                                               
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)                                                                                               
EndSection                                                                                                                                                           
                                                                                                                                                                     
Section "Module"                                                                                                                                                     
    Load "v4l" # Video for Linux                                                                                                                                     
EndSection                                                                                                                                                           
                                                                                                                                                                     
Section "Monitor"                                                                                                                                                     
    Identifier "monitor1"                                                                                                                                             
    VendorName "Plug'n Play"                                                                                                                                         
    ModelName "HP w2207"                                                                                                                                             
    HorizSync 24-83                                                                                                                                                   
    VertRefresh 48-76                                                                                                                                                 
                                                                                                                                                                     
    # Monitor preferred modeline (60.0 Hz vsync, 65.3 kHz hsync, ratio 16/10, 90 dpi)                                                                                 
    ModeLine "1680x1050" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync                                                                                 
                                                                                                                                                                     
    # TV fullscreen mode or DVD fullscreen output.                                                                                                                   
    # 768x576 @ 79 Hz, 50 kHz hsync                                                                                                                                   
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630                                                                                             
                                                                                                                                                                     
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_120"  313.20  1680 1816 2000 2320  1050 1051 1054 1125  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_100"  256.20  1680 1808 1992 2304  1050 1051 1054 1112  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_85"  214.51  1680 1800 1984 2288  1050 1051 1054 1103  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_75"  188.07  1680 1800 1984 2288  1050 1051 1054 1096  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_60"  147.14  1680 1784 1968 2256  1050 1051 1054 1087  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_50"  120.21  1680 1776 1952 2224  1050 1051 1054 1081  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_120"  284.04  1600 1728 1904 2208  1000 1001 1004 1072  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_100"  232.13  1600 1720 1896 2192  1000 1001 1004 1059  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_85"  194.21  1600 1712 1888 2176  1000 1001 1004 1050  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_75"  169.13  1600 1704 1880 2160  1000 1001 1004 1044  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_60"  133.14  1600 1704 1872 2144  1000 1001 1004 1035  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_50"  108.66  1600 1688 1856 2112  1000 1001 1004 1029  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_120"  229.75  1440 1552 1712 1984  900 901 904 965  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_100"  187.55  1440 1544 1704 1968  900 901 904 953  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_85"  156.79  1440 1536 1696 1952  900 901 904 945  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_75"  136.49  1440 1536 1688 1936  900 901 904 940  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_60"  106.47  1440 1520 1672 1904  900 901 904 932  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_50"  87.41  1440 1512 1664 1888  900 901 904 926  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_120"  181.21  1280 1376 1520 1760  800 801 804 858  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_100"  147.89  1280 1376 1512 1744  800 801 804 848  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_85"  123.38  1280 1368 1504 1728  800 801 804 840  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_75"  107.21  1280 1360 1496 1712  800 801 804 835  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_60"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_50"  68.56  1280 1336 1472 1664  800 801 804 824  -HSync +Vsync
EndSection

Section "Device"
    Identifier "device1"
    BoardName "NVIDIA GeForce 400 series and later"
    Driver "nvidia"
    Option "DPMS"
    Option "DynamicTwinView" "false"
    Option "AddARGBGLXVisuals"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24
   
    Subsection "Display"
        Depth 8
        Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
    EndSubsection
   
    Subsection "Display"
        Depth 15
        Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
    EndSubsection
   
    Subsection "Display"
        Depth 16
        Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
    EndSubsection
   
    Subsection "Display"
        Depth 24
        Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    Screen "screen1"
EndSection
[raed@localhost ~]$

it's weird why i face this problem just in pclinuxos   

[sling-shot]

Please write down that startup error EXACTLY as it appears. There may be a clue there.

[raed]

Please write down that startup error EXACTLY as it appears. There may be a clue there.

I appreciate your time and help
this is the message EXACTLY
grep : /etc/X11/xorg.conf : no such file or directory also after this message there is anothe "modprobe vboxdrv failed. Please use ‘dmesg’ to find out why failed!"

[raed]

is there another program to record ? just for try
i try gtk-recordmydesktop but after encoding video and play it , it's all green !!

because that lag with minimize effect happen when i play the video in any program vlc - smplayer .. etc or upload it to youtube, but when i use kde and animation there is no lag at all. i don't know if this explain maybe the problem with ffmpeg !?