[SOLVED] E17 Mixer "Problem"

[RobNJ]

More like a small bump in the road 
I didn't think to take a screenshot.. but on my install, the default mixer icon on the shelf , when clicked, produced a double slider that didn't alter the volume.

I added another shelf.. put in a mixer, which gave a single slider that worked as expected..moved it down to the bottom shelf, and all is right with the world 

[JohnW_57]

It was also easy to fix with the mixer shelf settings. 

JohnW

[RobNJ]

It was also easy to fix with the mixer shelf settings. 

JohnW

Yup, was just about to mention that, from my running it on the desktop. 

Marking this solved.

[Agust]

I tried e17 with lxde base and I have no sound, not putting the actual base iso with KDE.
In Lxde "gmixer" does not work, install "amixer", but the channel "Master" is not therefore still have no audio.
In PCLOS-center, detects the card, but I still have sound.
Alsaconf , not detect the soundcard.

In Debian same problem , but fixed with:
root $ echo “options snd_hda_intel model=auto” » /etc/modprobe.d/alsa-base.conf ; rmmod snd_hda_intel ; modprobe snd_hda_intel

Machine:   System: Gigabyte product: H55M-D2H
           Mobo: Gigabyte model: H55M-S2H version: x.x Bios: Award version: F3 date: 08/20/2010
CPU:       Dual core Intel Core i3 CPU 540 (-HT-MCP-) cache: 4096 KB flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 12272.8
           Clock Speeds: 1: 1197.00 MHz 2: 1197.00 MHz 3: 1197.00 MHz 4: 3059.00 MHz
Graphics:  Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0
           X.Org: 1.14.0 driver: intel Resolution: 1440x900@59.9hz
           GLX Renderer: Mesa DRI Intel Ironlake Desktop x86/MMX/SSE2 GLX Version: 2.1 Mesa 9.1.1 Direct Rendering: Yes
Audio:     Card: Intel 5 Series/3400 Series High Definition Audio driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture ver: k3.8.6-1
Network:   Card: Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller
           driver: r8169 ver: 2.3LK-NAPI port: ce00 bus-ID: 03:00.0
           IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 500.1GB (0.9% used) 1: id: /dev/sda model: ST3500418AS size: 500.1GB
Partition: ID: / size: 107G used: 3.9G (4%) fs: ext4 ID: /home size: 125G used: 438M (1%) fs: ext4
           ID: swap-1 size: 1.16GB used: 0.00GB (0%) fs: swap
Sensors:   System Temperatures: cpu: 37.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 120 Uptime: 5:50 Memory: 417.3/3405.9MB Runlevel: 5 Gcc sys: 4.8.0
           Client: Shell (bash 4.2.45) inxi: 1.8.45

Note:
All this in Live CD, I have not installed.