Hello,
Below is a copy of my boot log. can i remove the messages in red ?
%Gcannot open file delete
Welcome to [1;36mPCLinuxOS[0;39m 2012
Press 'I' to enter interactive startup.
Starting udev: udevd[118]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /etc/udev/rules.d/55-alsa-tascam-firmware-loaders.rules:2
udevd[118]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /etc/udev/rules.d/55-alsa-tascam-firmware-loaders.rules:3
udevd[118]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /etc/udev/rules.d/55-alsa-tascam-firmware-loaders.rules:5
udevd[118]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /etc/udev/rules.d/55-alsa-tascam-firmware-loaders.rules:6
udevd[118]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /etc/udev/rules.d/55-alsa-tascam-firmware-loaders.rules:8
udevd[118]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /etc/udev/rules.d/55-alsa-tascam-firmware-loaders.rules:9
%G[85G[[1;32m OK [0;39m]
Setting hostname 8.8.8.8: [85G[[1;32m OK [0;39m]
Setting up Logical Volume Management: File-based locking initialisation failed.
No volume groups found
[85G[[1;32m OK [0;39m]
Checking root filesystem
/dev/sdb5: clean, 451401/3203072 files, 3813974/12799780 blocks
[85G[[1;32m OK [0;39m]
Remounting root filesystem in read-write mode: [85G[[1;32m OK [0;39m]
Invalidating stale software suspend images... done.
Checking filesystems
/dev/sdb6: clean, 28240/27197440 files, 11936482/108786147 blocks
[85G[[1;32m OK [0;39m]
Mounting local filesystems: [85G[[1;32m OK [0;39m]
Checking loopback filesystems[85G[[1;32m OK [0;39m]
Mounting loopback filesystems: [85G[[1;32m OK [0;39m]
Enabling /etc/fstab swaps: [85G[[1;32m OK [0;39m]
Enabling swap space: [85G[[1;32m OK [0;39m]
Starting netprofile: The default is the current profile.
[85G[[1;32m OK [0;39m]
broadcom-wl (5_100_82_112-1pclos2012): Already installed on this kernel.
fglrx (8.961-1pclos2012): Already installed on this kernel.
madwifi (0.9.4-13pclos2011): Already installed on this kernel.
nvidia-current (302.17-1pclos2012): Already installed on this kernel.
nvidia173 (173.14.31-1pclos2012): Already installed on this kernel.
nvidia96xx (96.43.20-1pclos2011): Already installed on this kernel.
Checking for new hardware [85G[[1;32m OK [0;39m]
INIT: Entering runlevel: 3
Entering non-interactive startup
Activating Compat-mode for non LSB-script gnokii-smsd
Activating Compat-mode for non LSB-script firestarter
Activating Compat-mode for non LSB-script bpalogin
Starting portreserve: [85G[[1;32m OK [0;39m]
acpid: starting up with proc fs
Starting acpi daemon: [85G[[1;32m OK [0;39m]
Starting irqbalance: [85G[[1;32m OK [0;39m]
Starting numlock: [85G[[1;32m OK [0;39m]
Starting atd: [85G[[1;32m OK [0;39m]
ALSA driver is already running.Doing alsactl to restore mixer settings: [85G[[1;32m OK [0;39m]
Starting system logger: [85G[[1;32m OK [0;39m]
Starting kernel logger: [85G[[1;32m OK [0;39m]
Starting resolvconf: [85G[[1;32m OK [0;39m]
Starting auditd: [85G[[1;32m OK [0;39m]
Starting VirtualBox kernel modules [85G[[1;32m OK [0;39m]
Starting bpalogin:
Bringing up loopback interface: 127.0.0.1
squid is stopped
WARNING: Cannot write log file: /var/log/squid/cache.log
/var/log/squid/cache.log: Permission denied
messages will be sent to 'stderr'.
squid: ERROR: No running copy
[85G[[1;32m OK [0;39m]
Bringing up interface eth0: [85G[[1;32m OK [0;39m]
Bringing up interface ppp0: Device ppp0: The connect script failed (maybe wrong password or wrong phone number).
[85G[[1;31mFAILED[0;39m]
Bringing up interface wwan0: [85G[[1;32m OK [0;39m]
Starting xinetd[85G[[1;32m OK [0;39m]
Starting crond: [85G[[1;32m OK [0;39m]
nxsensor is disabled in '/usr/NX/etc/node.cfg'
Starting system message bus: [85G[[1;32m OK [0;39m]
Starting uuidd: [85G[[1;32m OK [0;39m]
Starting HAL daemon: [85G[[1;32m OK [0;39m]
Trying to start NX server:
NX> 122 Service started.
NX> 999 Bye.
Trying to start NX statistics:
NX> 723 Cannot start NX statistics:
NX> 709 NX statistics are disabled for this server.
NX> 999 Bye.
Waiting for network to be up[85G[[1;32m OK [0;39m]
Starting nscd: [85G[[1;32m OK [0;39m]
Starting sshd:[85G[[1;32m OK [0;39m]
Starting saslauthd: [85G[[1;32m OK [0;39m]
Creating hardlink from /var/run/saslauthd/mux to /var/spool/postfix/var/run/saslauthd/
Starting Avahi daemon: [85G[[1;32m OK [0;39m]
Starting drakxtools_http: [85G[[1;32m OK [0;39m]
drakxtools_http
Starting X Font Server: [85G[[1;32m OK [0;39m]
Starting smart card daemon: [85G[[1;32m OK [0;39m]
Starting dansguardian: [85G[[1;32m OK [0;39m]
Adding loopback device to routing table ...
Starting CUPS printing system: [85G[[1;32m OK [0;39m]
Re-enabling disabled print queues:
lpstat: No destinations added.
Starting named: [85G[[1;32m OK [0;39m]
Starting snmpd: [85G[[1;32m OK [0;39m]
Starting sendmail: [85G[[1;32m OK [0;39m]
Starting sm-client: [85G[[1;32m OK [0;39m]
Starting smartd: [85G[[1;32m OK [0;39m]
Starting wine: [85G[[1;32m OK [0;39m]
Compiling...
Shorewall configuration compiled to /var/lib/shorewall/.start
Starting Shorewall....
done.
init_cache_dir ... Starting squid: ....................[85G[[1;31mFAILED[0;39m]
Aug 8 22:30:04 8 NET[4853]: /sbin/dhclient-script : updated /etc/resolv.conf
Aug 8 22:35:03 8 NET[4574]: /sbin/dhclient-script : updated /etc/resolv.conf
Aug 9 15:31:23 8 NET[4377]: /sbin/dhclient-script : updated /etc/resolv.conf
Aug 9 18:16:58 8 NET[4323]: /sbin/dhclient-script : updated /etc/resolv.conf
