[SOLVED] samba : NT_STATUS_NO_LOGON_SERVERS

[muungwana]

what does smbtree -N -d3 say after the changes i suggested?

[metro]

smbtree -N -d3 shows:

Code: [Select]

[root@localhost laurie]# smbtree -N -d3
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
added interface eth1 ip=fe80::fad1:11ff:fe05:82a2%eth1 bcast=fe80::ffff:ffff:ffff:ffff%eth1 netmask=ffff:ffff:ffff:ffff::
added interface eth1 ip=192.168.0.163 bcast=192.168.0.255 netmask=255.255.255.0
resolve_lmhosts: Attempting lmhosts lookup for name METRO<0x1d>
name_resolve_bcast: Attempting broadcast lookup for name METRO<0x1d>
resolve_lmhosts: Attempting lmhosts lookup for name METRO<0x1b>
resolve_wins: Attempting wins lookup for name METRO<0x1b>
resolve_wins: WINS server resolution selected and no WINS servers listed.
name_resolve_bcast: Attempting broadcast lookup for name METRO<0x1b>
name_resolve_bcast: Attempting broadcast lookup for name __MSBROWSE__<0x1>


[muungwana]

smbtree -N -d3 shows:

Code: [Select]

[root@localhost laurie]# smbtree -N -d3
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
added interface eth1 ip=fe80::fad1:11ff:fe05:82a2%eth1 bcast=fe80::ffff:ffff:ffff:ffff%eth1 netmask=ffff:ffff:ffff:ffff::
added interface eth1 ip=192.168.0.163 bcast=192.168.0.255 netmask=255.255.255.0
resolve_lmhosts: Attempting lmhosts lookup for name METRO<0x1d>
name_resolve_bcast: Attempting broadcast lookup for name METRO<0x1d>
resolve_lmhosts: Attempting lmhosts lookup for name METRO<0x1b>
resolve_wins: Attempting wins lookup for name METRO<0x1b>
resolve_wins: WINS server resolution selected and no WINS servers listed.
name_resolve_bcast: Attempting broadcast lookup for name METRO<0x1b>
name_resolve_bcast: Attempting broadcast lookup for name __MSBROWSE__<0x1>


If you kept the changes i suggested,then the local master browser is now on your windows computer and linux samba broadcast messages do not get a response.This suggests a firewall is up on your windows computer and its blocking your linux traffic.

Can you turn off windows firewall if you have one and try again to run smbtree?

[metro]

Just noticed you posted before me, ignore my post below I will set system back to what you suggested and disable XP firewall

thanks muungwana
I'm assuming that there is only one place for firewall setting and thats in PCC
I choose Security and under "Setup your personal firewall" I note checkbox is already ticked to allow
everything ...no firewall.

does that apply to LAN

one thing I tried whilst waiting for your reply was to set only "preferred master to no and the others yes. With security  set to share
I get my workgroup appear i Dolphin , but when I click on it to view shares I get an "Authorization Dialog" request popup. None of my passwords work however

[muungwana]

local master = no 
domain master = no
preferred master = no

The option to change are above, i think you can keep the security one the way it was for now.The problem is i think with the master browser, keep those off to have only one master browser running on your windows computer.


The master browser is on windows, you are supposed to turn off firewall in windows. The firewall in windows is the one that blocks dolphin from working

[metro]

      

Code: [Select]

[root@localhost laurie]# smbtree -N -d3
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
added interface eth1 ip=fe80::fad1:11ff:fe05:82a2%eth1 bcast=fe80::ffff:ffff:ffff:ffff%eth1 netmask=ffff:ffff:ffff:ffff::
added interface eth1 ip=192.168.0.163 bcast=192.168.0.255 netmask=255.255.255.0
resolve_lmhosts: Attempting lmhosts lookup for name METRO<0x1d>
name_resolve_bcast: Attempting broadcast lookup for name METRO<0x1d>
Got a positive name query response from 192.168.0.142 ( 192.168.0.142 )
Connecting to host=192.168.0.142
Connecting to 192.168.0.142 at port 445
Doing spnego session setup (blob length=16)
server didn't supply a full spnego negprot
Got challenge flags:
Got NTLMSSP neg_flags=0x628a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x60088215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x60088215
name_resolve_bcast: Attempting broadcast lookup for name __MSBROWSE__<0x1>
Got a positive name query response from 192.168.0.142 ( 192.168.0.142 )
Connecting to host=192.168.0.142
Connecting to 192.168.0.142 at port 445
Doing spnego session setup (blob length=16)
server didn't supply a full spnego negprot
Got challenge flags:
Got NTLMSSP neg_flags=0x628a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x60088215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x60088215
METRO
Connecting to host=192.168.0.142
Connecting to 192.168.0.142 at port 445
Doing spnego session setup (blob length=16)
server didn't supply a full spnego negprot                                                                                                                                                                         
Got challenge flags:                                                                                                                                                                                               
Got NTLMSSP neg_flags=0x628a8215                                                                                                                                                                                   
NTLMSSP: Set final flags:                                                                                                                                                                                         
Got NTLMSSP neg_flags=0x60088215                                                                                                                                                                                   
NTLMSSP Sign/Seal - Initialising with flags:                                                                                                                                                                       
Got NTLMSSP neg_flags=0x60088215
        \\OFFICE                        %office
Connecting to host=OFFICE
resolve_lmhosts: Attempting lmhosts lookup for name OFFICE<0x20>
resolve_wins: Attempting wins lookup for name OFFICE<0x20>
resolve_wins: WINS server resolution selected and no WINS servers listed.
resolve_hosts: Attempting host lookup for name OFFICE<0x20>
Connecting to 192.168.0.163 at port 445
Doing spnego session setup (blob length=58)
got OID=1.3.6.1.4.1.311.2.2.10
got principal=NONE
Got challenge flags:
Got NTLMSSP neg_flags=0x608a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x60088215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x60088215
SPNEGO login failed: Logon failure
                \\OFFICE\LEXMARKE120n           LEXMARK E120
                \\OFFICE\HP_Photosmart_C5200_series     HP Photosmart C5200 series
                \\OFFICE\Cups-PDF               Cups-PDF
                \\OFFICE\IPC$                   IPC Service (%office)
                \\OFFICE\Laurie PDF             Laurie PDF
                \\OFFICE\PCLinux Downloads      Downloads
                \\OFFICE\officedocs             Downloads
                \\OFFICE\Laurie Transfer        Laurie Transfer
                \\OFFICE\pdf-gen                PDF Generator (only valid users)
                \\OFFICE\print$
        \\DELL                          DELL
Connecting to host=DELL
resolve_lmhosts: Attempting lmhosts lookup for name DELL<0x20>
resolve_wins: Attempting wins lookup for name DELL<0x20>
resolve_wins: WINS server resolution selected and no WINS servers listed.
resolve_hosts: Attempting host lookup for name DELL<0x20>
Connecting to 192.168.0.142 at port 445
Doing spnego session setup (blob length=16)
server didn't supply a full spnego negprot
Got challenge flags:
Got NTLMSSP neg_flags=0x628a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x60088215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x60088215
                \\DELL\docket           Generic / Text Only
                \\DELL\C$               Default share
                \\DELL\ADMIN$           Remote Admin
                \\DELL\SharedDocs
                \\DELL\print$           Printer Drivers
                \\DELL\IPC$             Remote IPC
                \\DELL\My Documents
                \\DELL\E$               Default share
\

I guess i need to google how to allow exceptions for XP firewall now

Than you so much muungwana I was about to go out and buy windoze7 (wash my mouth out)

I'm grateful there are many  people here like your self willing to help

[muungwana]

I guess i need to google how to allow exceptions for XP firewall now

Than you so much muungwana I was about to go out and buy windoze7 (wash my mouth out)

I'm grateful there are many  people here like your self willing to help

you are welcome.

If you are happy with the result, can you change the title of the thread and add "solved" to it? its one of those rules around here.

[muungwana]

It looks like its possible to turn off samba master browser on windows xp.

Instructions to do so are here: http://www.yellowpigs.net/mirrors/CMS/faq_by_subtopic/node140.html

you can turn it off on windows and turn it on in linux and things should work as expected.