« Reply #10 on: February 23, 2012, 12:21:18 AM »
I tried to install the 64 bit version but the module refused to let itself be built against either of my kernels (3.2.6-etjr1 and 2.6.38.8-pclos3). I had to uninstall your rpms and reinstall the 290.10 versions from the repository. I don't know what went wrong as the error messages scrolled by too fast.
Strange 
I just tested it on another system:
-rw-rw-r-- 1 terry terry 3581881 Feb 23 00:44 dkms-nvidia-current-295.20-1_terryn_2012.x86_64.rpm
-rw-rw-r-- 1 terry terry 16357776 Feb 23 00:45 x11-driver-video-nvidia-current-295.20-1_terryn_2012.x86_64.rpm
[root@localhost Downloads]# rpm -Uvh *
Preparing... ########################################### [100%]
1:x11-driver-video-nvidia########################################### [ 50%]
2:dkms-nvidia-current ########################################### [100%]
Creating symlink /var/lib/dkms/nvidia-current/295.20-1_terryn_2012/source ->
/usr/src/nvidia-current-295.20-1_terryn_2012
DKMS: add Completed.
Preparing kernel 2.6.38.8-pclos3 for module build:
(This is not compiling a kernel, just preparing kernel symbols)
Storing current .config to be restored when complete
Running Generic preparation routine
make mrproper....
using /proc/config.gz
make oldconfig.....
make prepare....
Building module:
cleaning build area....
make KERNELRELEASE=2.6.38.8-pclos3 SYSSRC=/lib/modules/2.6.38.8-pclos3/build module..........
cleaning build area....
cleaning kernel tree (make mrproper)....
DKMS: build Completed.
nvidia-current.ko.gz:
- Installation
- Installing to /lib/modules/2.6.38.8-pclos3/kernel/drivers/char/drm/
depmod....
DKMS: install Completed.
-------- Uninstall Beginning --------
Module: nvidia-current
Version: 290.10-1pclos2011
Kernel: 2.6.38.8-pclos3 (x86_64)
-------------------------------------
Status: This module version was INACTIVE for this kernel.
depmod....
DKMS: uninstall Completed.
------------------------------
Deleting module version: 290.10-1pclos2011
completely from the DKMS tree.
------------------------------
Done.
Need to think about this a bit more .. but it's getting late now so that's a job for tomorrow 
Terry
I tried once more with the same result. Here my install differs from yours:
[...]
Building module:
cleaning build area....
make KERNELRELEASE=2.6.38.8-pclos3 SYSSRC=/lib/modules/2.6.38.8-pclos3/build module........(bad exit status: 2)
Error! Bad return status for module build on kernel: 2.6.38.8-pclos3 (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/nvidia-current/295.20-1_terryn_2012/build/ for more information.
-------- Uninstall Beginning --------
Module: nvidia-current
Version: 290.10-1pclos2011
Kernel: 3.2.6-etjr1 (x86_64)
-------------------------------------
Status: Before uninstall, this module version was ACTIVE on this kernel.
[...]
The last lines of the make.log file:
[...]
ld: Relocatable linking with relocations from format elf32-i386 (/var/lib/dkms/nvidia-current/295.20-1_terryn_2012/build/nv-kernel.o) to format elf64-x86-64 (/var/lib/dkms/nvidia-current/295.20-1_terryn_2012/build/nvidia.o) is not supported
make[3]: *** [/var/lib/dkms/nvidia-current/295.20-1_terryn_2012/build/nvidia.o] Error 1
make[2]: *** [_module_/var/lib/dkms/nvidia-current/295.20-1_terryn_2012/build] Error 2
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [module] Error 1
make: *** [module] Error 2
This time I only got normal error messages when I tried and failed to restart X. (Last time I got lots of them.)
« Last Edit: February 23, 2012, 12:26:18 AM by Bald Brick »

Logged
Feed the trolls!
They need it!
AMD Athlon 7450 Dual-Core Processor, 7.80 GiB RAM, Nvidia GeForce GT 120/PCIe/SSE2, OpenGL/ES-version: 3.3 0 NVIDIA 295.40, SBx00 Azalia (Intel HDA) soundcard, Logitech B500 webcam, SAA7146 DVB card, HDDs: Seagate 250824AS, Western Digital WD10EAVS-00D