Artec T14BR DVB-T

[erikhallsten]

Dear Readers,

I was using happily the  Artec T14BR DVB-T stick for a couple of weeks.
A week ago it stopped to work.

I suspect that a "clever" cunning person was changing something in the
updates. I made an ordinary update using Synaptic as tha users are
told to do.

Now I have an Artec T14BR DVB-T usb stick that refuses to work.

I am hoping that that Clever Cunning person makes an update by which
I can start wathing TV using Artec T14BR DVB-T.

Erik Hallsten
Tampere  (in swedish Tammerfors)
Finland

[erikhallsten]

Dear Readers,

By the latest update I was able again to
see TV. By that the problems with using
Artec T14BR Dvb-T usb-stick are solved.

Someone in your team used amazing witchcraft.
By that the bits started to work in a such
way that Kaffeine started to open the TV
channels at Tampere_Pyynikki slave sender.

Kan now tell people in my hometown that
Install PCLinuxOS solve TV looking with
your computer.

Thank You All.

Erik Hallsten

Tammerfors
Finland

[erikhallsten]

Dear Readers,

Updating gives problems.

[root@localhost firmware]# find /usr -name firmware
/usr/share/foo2zjs/firmware
/usr/src/kernel-devel-2.6.33.5-pclos1.bfs/drivers/firmware
/usr/src/kernel-devel-2.6.33.5-pclos1.bfs/firmware
[root@localhost firmware]#

By cd:ing to

[root@localhost firmware]# cd /usr/src/kernel-devel-2.6.33.5-pclos1.bfs/drivers/firmware

Following was find:

[root@localhost firmware]# ls
Kconfig  Makefile
[root@localhost firmware]#

But

command cat Konfig or cat Makefile gives contents which I do not understand
how to handle.

When i tried to start Kaffeine There showed up Dib 7000PC
That is Completly incompatible. From earlier ocassions when
Kaffeine worked there existed Dib0700.

By that I am again forced to ask, how to get Artec t14BR dvb-t stick to work.

Extrat from dmesg:

usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.5-pclos1.bfs ohci_hcd
usb usb1: SerialNumber: 0000:00:03.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffff000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.5-pclos1.bfs ehci_hcd
usb usb2: SerialNumber: 0000:00:03.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffe000
ppdev: user-space parallel port driver
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.5-pclos1.bfs ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
fuse init (API version 7.13)
ieee1394: raw1394: /dev/raw1394 device initialized
vboxguest: VirtualBox Guest PCI device not found.
usb 2-6: new high speed USB device using ehci_hcd and address 2
usb 2-6: New USB device found, idVendor=0aec, idProduct=3260
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: USB Storage Device
usb 2-6: Manufacturer: GENERIC
usb 2-6: SerialNumber: 000123456789
Initializing USB Mass Storage driver...
scsi2 : usb-storage 2-6:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.

End of Extrat

Who can give correct instructions?

Erik Hallsten

Tammerfors
Finland